Hi Gregory

+
+static int mvebu_uart_startup(struct uart_port *port)
+{
+       int ret;
+
+       writel(CTRL_TXFIFO_RST | CTRL_RXFIFO_RST,
+              port->membase + UART_CTRL);
+       udelay(1);
+       writel(CTRL_RX_INT, port->membase + UART_CTRL);
+
+       ret = request_irq(port->irq, mvebu_uart_isr, port->irqflags, "serial",
+                         port);
+       if (ret) {
+               dev_err(port->dev, "failed to request irq\n");
+               return ret;
+       }
+
+       return 0;
+}
+

+static int mvebu_uart_probe(struct platform_device *pdev)
+{
+       struct resource *reg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+       struct uart_port *port;
+       struct mvebu_uart_data *data;
+       int ret;
+
+       if (!reg || !irq) {
+               dev_err(&pdev->dev, "no registers/irq defined\n");
+               return -EINVAL;
+       }
+
+       port = &mvebu_uart_ports[0];
+
+       spin_lock_init(&port->lock);
+
+       port->dev        = &pdev->dev;
+       port->type       = PORT_MVEBU;
+       port->ops        = &mvebu_uart_ops;
+       port->regshift   = 0;
+
+       port->fifosize   = 32;
+       port->iotype     = UPIO_MEM32;
+       port->flags      = UPF_FIXED_PORT;
+       port->line       = 0; /* single port: force line number to  0 */
+
+       port->irq        = irq->start;
+       port->irqflags   = 0;

Please use port->irqflags = IRQF_SHARED;
As ubuntu opens multiple consoles A3700 can't boot to it (only to
buildroot with single console).

Best regards,
Marcin