On Wed, Jan 20, 2016 at 11:18 PM, James Liao [off-list ref] wrote:

Hi Rob,

On Wed, 2016-01-20 at 10:32 -0600, Rob Herring wrote:

quoted

On Wed, Jan 20, 2016 at 02:35:43PM +0800, James Liao wrote:

quoted

This patch adds the binding documentation for apmixedsys, bdpsys,
ethsys, hifsys, imgsys, infracfg, mmsys, pericfg, topckgen and
vdecsys for Mediatek MT2701.

Signed-off-by: James Liao <redacted>
Tested-by: John Crispin <redacted>
---
 .../bindings/arm/mediatek/mediatek,apmixedsys.txt  |  1 +
 .../bindings/arm/mediatek/mediatek,bdpsys.txt      | 22 ++++++++++++++++++++++
 .../bindings/arm/mediatek/mediatek,ethsys.txt      | 22 ++++++++++++++++++++++
 .../bindings/arm/mediatek/mediatek,hifsys.txt      | 22 ++++++++++++++++++++++
 .../bindings/arm/mediatek/mediatek,imgsys.txt      |  1 +
 .../bindings/arm/mediatek/mediatek,infracfg.txt    |  1 +
 .../bindings/arm/mediatek/mediatek,mmsys.txt       |  1 +
 .../bindings/arm/mediatek/mediatek,pericfg.txt     |  1 +
 .../bindings/arm/mediatek/mediatek,topckgen.txt    |  1 +
 .../bindings/arm/mediatek/mediatek,vdecsys.txt     |  1 +
 10 files changed, 73 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt
 create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
 create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
index 936166f..a701e19 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt

@@ -6,6 +6,7 @@ The Mediatek apmixedsys controller provides the PLLs to the system.
 Required Properties:

 - compatible: Should be:
+   - "mediatek,mt2701-apmixedsys"
    - "mediatek,mt8135-apmixedsys"
    - "mediatek,mt8173-apmixedsys"
 - #clock-cells: Must be 1

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt
new file mode 100644
index 0000000..4137196
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt

@@ -0,0 +1,22 @@
+Mediatek bdpsys controller
+============================
+
+The Mediatek bdpsys controller provides various clocks to the system.

As you clarified these blocks provide more that just clocks. Please list
all the functions here and on the others.

Some blocks may provide clock and reset controller at the same time. But

Then say the block provides clocks and resets is all I'm asking for.

most of them will not provide functions directly. Instead, some DT
blocks which provide specific functions may refer to these controller
nodes due to it need to access the same register space.

For example, scpsys (the power domain provider) refers to infracfg
because it need to control infracfg registers when power on/off domains:

        scpsys: scpsys at 10006000 {
                compatible = "mediatek,mt2701-scpsys";
                #power-domain-cells = <1>;
                reg = <0 0x10006000 0 0x1000>;
                infracfg = <&infracfg>;
        };

So I think it should not need to list all functions for each blocks
here.

Sorry, but you do need to describe what functions the blocks provide.

Also, if you are accessing the infracfg regs directly to modify clock
registers outside of the clock driver, that is very bad design. The
clock driver could assume that register values are not changing behind
its back and it bypasses any locks around register accesses. I can see
why it is needed though, but we really need a proper interface.

Rob