[PATCH v2 2/4] mtd: fsl-quadspi: Rename SEQID_QUAD_READ to SEQID_READ
From: Yunhui Cui <hidden>
Date: 2016-02-01 11:38:53
Also in:
lkml
Subsystem:
memory technology devices (mtd), spi nor subsystem, the rest · Maintainers:
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, Pratyush Yadav, Michael Walle, Linus Torvalds
There are some read modes for flash, such as NORMAL, FAST, QUAD, DDR QUAD. These modes will use the identical lut table base So rename SEQID_QUAD_READ to SEQID_READ. Signed-off-by: Yunhui Cui <redacted> --- drivers/mtd/spi-nor/fsl-quadspi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 517ffe2..9861290 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c@@ -193,7 +193,7 @@ #define QUADSPI_LUT_NUM 64 /* SEQID -- we can have 16 seqids at most. */ -#define SEQID_QUAD_READ 0 +#define SEQID_READ 0 #define SEQID_WREN 1 #define SEQID_WRDI 2 #define SEQID_RDSR 3
@@ -386,8 +386,8 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q) for (i = 0; i < QUADSPI_LUT_NUM; i++) qspi_writel(q, 0, base + QUADSPI_LUT_BASE + i * 4); - /* Quad Read */ - lut_base = SEQID_QUAD_READ * 4; + /* Read */ + lut_base = SEQID_READ * 4; qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1, addrlen), base + QUADSPI_LUT(lut_base));
@@ -468,7 +468,7 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd) { switch (cmd) { case SPINOR_OP_READ_1_1_4: - return SEQID_QUAD_READ; + return SEQID_READ; case SPINOR_OP_WREN: return SEQID_WREN; case SPINOR_OP_WRDI:
--
2.1.0.27.g96db324