This commit adds some comments to the Armada 385 AP Device Tree
description to indicate which Ethernet interface matches which
physical connector on the board.
Signed-off-by: Thomas Petazzoni <redacted>
Cc: Maxime Ripard <redacted>
---
arch/arm/boot/dts/armada-385-db-ap.dts | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index acd5b15..86fde0b 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -134,18 +134,21 @@
};
};
+ /* CON3 */
ethernet at 30000 {
status = "okay";
phy = <&phy2>;
phy-mode = "sgmii";
};
+ /* CON2 */
ethernet at 34000 {
status = "okay";
phy = <&phy1>;
phy-mode = "sgmii";
};
+ /* CON4 */
ethernet at 70000 {
pinctrl-names = "default";
--
2.6.4