[PATCH] ARM: dts: orion5x: gpio pin fixes for linkstation lswtgl
flat view
STALE3917d
From: Roger Shimizu <hidden>
Date: 2016-01-20 10:44:48
Subsystem:
the rest · Maintainer:
Linus Torvalds
Here're a few gpio pin related fixes:
- remove pinctrl-0 definition from pinctrl, since those pins are used
in other places such as gpio-fan and regulators.
- turn on power led from initial state, by change pin to active_high
from active_low.
- fix for alarm pin of gpio-fan.
Signed-off-by: Roger Shimizu <redacted>
---
arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
index 3daec91..d40b593 100644
--- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
+++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts@@ -1,7 +1,8 @@ /* * Device Tree file for Buffalo Linkstation LS-WTGL * - * Copyright (C) 2015, Roger Shimizu <rogershimizu@gmail.com> + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual
@@ -69,8 +70,6 @@ internal-regs { pinctrl: pinctrl at 10000 { - pinctrl-0 = <&pmx_usb_power &pmx_power_hdd - &pmx_fan_low &pmx_fan_high &pmx_fan_lock>; pinctrl-names = "default"; pmx_led_power: pmx-leds {
@@ -161,7 +160,7 @@ led at 1 { label = "lswtgl:blue:power"; - gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; }; led at 2 {
@@ -188,7 +187,7 @@ 3250 1 5000 0>; - alarm-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; restart_poweroff {
--
2.1.4