[PATCH] mmc: pwrseq_simple: Make reset-gpios optional to match doc
From: Martin Fuzzey <hidden>
Date: 2016-01-08 09:07:26
Also in:
linux-mmc
Subsystem:
multimedia card (mmc), secure digital (sd) and sdio subsystem, the rest · Maintainers:
Ulf Hansson, Linus Torvalds
The DT binding doc says reset-gpios is an optional property but the code currently bails out if it is omitted. Make the code match the documentation. Signed-off-by: Martin Fuzzey <redacted> --- drivers/mmc/core/pwrseq_simple.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c
index d10538b..4d2962b 100644
--- a/drivers/mmc/core/pwrseq_simple.c
+++ b/drivers/mmc/core/pwrseq_simple.c@@ -29,15 +29,18 @@ struct mmc_pwrseq_simple { static void mmc_pwrseq_simple_set_gpios_value(struct mmc_pwrseq_simple *pwrseq, int value) { - int i; struct gpio_descs *reset_gpios = pwrseq->reset_gpios; - int values[reset_gpios->ndescs]; - for (i = 0; i < reset_gpios->ndescs; i++) - values[i] = value; + if (!IS_ERR(reset_gpios)) { + int i; + int values[reset_gpios->ndescs]; - gpiod_set_array_value_cansleep(reset_gpios->ndescs, reset_gpios->desc, - values); + for (i = 0; i < reset_gpios->ndescs; i++) + values[i] = value; + + gpiod_set_array_value_cansleep( + reset_gpios->ndescs, reset_gpios->desc, values); + } } static void mmc_pwrseq_simple_pre_power_on(struct mmc_host *host)
@@ -79,7 +82,8 @@ static void mmc_pwrseq_simple_free(struct mmc_host *host) struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq, struct mmc_pwrseq_simple, pwrseq); - gpiod_put_array(pwrseq->reset_gpios); + if (!IS_ERR(pwrseq->reset_gpios)) + gpiod_put_array(pwrseq->reset_gpios); if (!IS_ERR(pwrseq->ext_clk)) clk_put(pwrseq->ext_clk);
@@ -112,7 +116,8 @@ struct mmc_pwrseq *mmc_pwrseq_simple_alloc(struct mmc_host *host, } pwrseq->reset_gpios = gpiod_get_array(dev, "reset", GPIOD_OUT_HIGH); - if (IS_ERR(pwrseq->reset_gpios)) { + if (IS_ERR(pwrseq->reset_gpios) && + PTR_ERR(pwrseq->reset_gpios) != -ENOENT) { ret = PTR_ERR(pwrseq->reset_gpios); goto clk_put; }