Am Donnerstag, 28. Januar 2016, 00:23:24 schrieb Stephen Boyd:

On 01/21, Emilio L?pez wrote:

quoted

@@ -3059,7 +3069,25 @@ struct clk *__of_clk_get_from_provider(struct

of_phandle_args *clkspec,> 
  */
 
 struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec)
 {

-	return __of_clk_get_from_provider(clkspec, NULL, __func__);
+	return __of_clk_get_from_provider(clkspec, NULL, __func__, false);
+}
+
+/**
+ * of_clk_get_from_provider_with_orphans() - Lookup clock from a clock
provider + * @clkspec: pointer to a clock specifier data structure
+ *
+ * This function looks up a struct clk from the registered list of clock
+ * providers, an input is a clock specifier data structure as returned
+ * from the of_parse_phandle_with_args() function call.
+ *
+ * The difference to of_clk_get_from_provider() is that this function
will
+ * also successfully lookup orphan-clocks, as it in some cases may be
+ * necessary to access such orphan-clocks as well.
+ */
+struct clk *
+of_clk_get_from_provider_with_orphans(struct of_phandle_args *clkspec)

Dislike. In fact, the whole clk conf approach is odd here. When
we're doing of_clk_init() we do a best effort loop around
parent_ready(), waiting for clk providers to register as long as
we have a clocks property in our provider node. We should do
something similar in the non of_clk_init() case too, because
of_clk_init() isn't special.

At least to me being able to reparent orphan clocks when knowing that they 
won't ever get supplied is special.

The Rockchip clock controller has quite a number of clocks that can either be 
supplied by some external source. xin32k supplied by some i2c chip being the 
most prominent. But while this one will get supplied eventually, there are 
others who will never get a supply and stay orphans forever.

Example:
rk3288 sclk_edp_24m can get supplied by either the general 24MHz oscillator or 
some separate clock input connected some chip pin. Reset-default seems to be 
the external supply, but on all boards I've seen so far doesn't get connected.

So we know on a per-board level if this is connected and want to move away 
from the non-existent source. Which is why the limit of this new function is 
limited to be ccf internal and the assigned-clock-parents path.


I guess if you really dislike that approach the other option would be 
reparenting all the time in the clock-controller driver and then let the 
board-dts reparent back if needed. Which would also work for that clock, but 
may cause other glitches down the road when it affects some pre-setup things.

Furthermore, the assigned parents and rates feature doesn't need
the clocks that we're assigning parents and rates to to even be
provided or consumed by the provider that's probing, so I'm lost
why we're checking the provider's node for a clocks property. It
would be better to check the assigned-clocks and assigned-parents
properties and make sure that those are all non-orphans. If
they're orphaned, we should delay until another clk provider is
registered. Eventually we'll unstick the orphans and then the
tree can be configured. Running the configuration at the end of
of_clk_init() even if we still can't get the clocks doesn't make
any sense to me.

To be really nice, we could build up a set of configuration
actions (set this parent, set this rate), and run those actions
when we drop the orphan flag. If some clock is orphaned that
we're trying to configure, we can attach the action to a list in
the clk_core structure. Otherwise we'll run the action
immediately. This way, we do a best effort to run as much of the
configuration as possible when the provider is registered the
first time and skip the overhead of cycling through a potentially
long list of provider actions to see if we can run them now. This
last part may be over-engineered though. I'm not sure if we
really have any such scenario today.