ARM: dts: lager: Enable SCIF_CLK frequency and pins

Started by Geert Uytterhoeven on Jan 29, 2016

Subsystems (1)

Maintainers (1)

DORMANTno replies

open the first message on its own page

Message details and related content
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.

This increases the range and accuracy of supported baud rates.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Untested, based on schematics.

v4:
  - Change one-line summary prefix to match current arm-soc practices,

v3:
  - New.
---
 arch/arm/boot/dts/r8a7790-lager.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 052dcee4790dd298..cdc0414f5f0716dd 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -291,6 +291,9 @@
 };
 
 &pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
 	du_pins: du {
 		renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
 		renesas,function = "du";
@@ -301,6 +304,11 @@
 		renesas,function = "scif0";
 	};
 
+	scif_clk_pins: scif_clk {
+		renesas,groups = "scif_clk";
+		renesas,function = "scif_clk";
+	};
+
 	ether_pins: ether {
 		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
 		renesas,function = "eth";
@@ -485,6 +493,11 @@
 	status = "okay";
 };
 
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
 &msiof1 {
 	pinctrl-0 = <&msiof1_pins>;
 	pinctrl-names = "default";
-- 
1.9.1
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help