[PATCH V2 2/3] ARM: bcm2835: I2S: use new register-range and clock framework

On 16.01.2016, at 16:26, Stefan Wahren [off-list ref] wrote:

Hi Martin,

[add Mike and Remi]

Am 12.01.2016 um 13:35 schrieb kernel at martin.sperl.org:

quoted

From: Martin Sperl <redacted>

Since the move to the new clock framework with commit 94cb7f76caa0
("ARM: bcm2835: Switch to using the new clock driver support.")
the bcm2835-i2s driver was no longer working.

This patch fixes the address ranges:
* remove the PCM clock register range that is owned by the clockmanager
* fix the length, which did not include the last register of this device

It also adds the required pcm-clock.

Signed-off-by: Martin Sperl <redacted>
---
 arch/arm/boot/dts/bcm2835.dtsi |    5 ++---

this won't apply, because the file has been renamed to bcm283x.dtsi.

Well - this "rename? was and still is not merged upstream, so it is an
unfortunate circumstance as I am going on vacation and can not create a
new patchset until I return. So please take it as a template
when applying it.

quoted

 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index aef64de..83d9787 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi

@@ -120,9 +120,8 @@

 		i2s: i2s at 7e203000 {
 			compatible = "brcm,bcm2835-i2s";
-			reg = <0x7e203000 0x20>,
-			      <0x7e101098 0x02>;
-
+			reg = <0x7e203000 0x24>;
+			clocks = <&clocks BCM2835_CLOCK_PCM>;

After applying clk series ([PATCH V4 0/7] clk: bcm2835: add clocks and add MASH support) and this series the pcm clock is an orphan.

Do we need to add "assigned-clocks" to the i2s node just like for pwm [1]?

In my experience it is not needed for PCM, as the clock is set by the
bcm2835-i2s driver, so I left it out.

As I do not know how the orphan PWM clock would be used I can not comment
if this is really needed with PWM or not - it would just set the default
clock if it got referenced in the DT.

Thanks,
	Martin