N900 sleep mode (in 4.5-rc0, if that matters)
From: Pavel Machek <hidden>
Date: 2016-01-30 20:14:57
Also in:
linux-omap, lkml
On Sat 2016-01-30 21:02:45, Pavel Machek wrote:
Hi!quoted
quoted
ffdffe8d 48004a20 (fa004a20) cm_idlest1_core blocking bits: 00200072 0000000d 48004a28 (fa004a28) cm_idlest3_core cm_idlest1_core changes periodicall often, to 00218072. The rest seems constant.For cm_idlest1_core 42 is the answer.. Here you have bits 4 and 5 blocking which is for OTG and it's PHY. That's a known issue with musb and setting pm_runtime_irq_safe() on the MUSB parent. If you do rmmod omap2430 and phy-twl4030usb chances are the LEDs will start going off assuming the McSPI bit goes low with WLAN idling.Ok, so I tried to compile kernel without omap2430/phy-twl4030usb . That did not help. So I thought, ok, maybe rmmod is needed to trigger some powersaving? But that is not exactly easy to do: pavel at n900:/my/tui/ofone$ sudo insmod /my/modules/omap2430.ko pavel at n900:/my/tui/ofone$ sudo insmod /my/modules/phy-twl4030-usb.ko pavel at n900:/my/tui/ofone$ sudo rmmod phy-twl4030-usb.ko Error: Module phy_twl4030_usb is in use pavel at n900:/my/tui/ofone$ Any ideas what jumps to use the modules? Charger code?
I tried a kernel without charger code, and no luck, rmmod fails the same way. dmesg says: [ 111.093078] wlan0: authenticated [ 111.097442] wlan0: associate with 06:27:22:f9:10:6a (try 1/3) [ 111.104553] wlan0: RX AssocResp from 06:27:22:f9:10:6a (capab=0x421 status=0 aid=2) [ 111.104705] wlan0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [ 111.104736] wlan0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [ 111.256652] wlan0: associated [ 184.681427] HS USB OTG: no transceiver configured [ 184.681488] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517 [ 184.681976] HS USB OTG: no transceiver configured [ 184.682006] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517 [ 187.690338] twl4030_usb 48070000.i2c:twl at 48:twl4030-usb: Initialized TWL4030 USB module [ 187.698303] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 187.698333] musb-hdrc: MHDRC RTL version 1.400 [ 187.698333] musb-hdrc: setup fifo_mode 4 [ 187.698394] musb-hdrc: 28/31 max ep, 16384/16384 memory pavel at n900:/my/tui/ofone$ Best regards, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html