On 01/28/2016 03:45 AM, Peter Hurley wrote:

On 01/27/2016 05:57 AM, Aleksey Makarov wrote:

quoted

On 01/25/2016 07:32 PM, Peter Hurley wrote:

quoted

On 01/25/2016 03:45 AM, Aleksey Makarov wrote:

quoted

'ARM Server Base Boot Requiremets' [1] mention SPCR (Serial Port
Console Redirection Table) [2] as a mandatory ACPI table that
specifies the configuration of serial console.

Parse this table and check if any registered console match the
description.  If it does, enable that console.

To implement that, introduce a new member int (*acpi_match)(struct
console *, struct acpi_table_spcr *) of struct console.  It allows
drivers to check if they provide a matching console device.

Many, many platform proms with all sorts of binary table layout are
already supported by the existing console infrastructure. Why is ACPI
different, that requires extensive (and messy) changes to console
initialization?

Without this patch, when linux calls register_console(), that function
checks if any console has been enabled so far. 1) If not, it enables the
console being registered. 2) If there exists any enabled console, it
looks at the console_cmdline array. That array holds a list of
consoles that user wishes to enable. There are two ways to append
an item to that list: first is to pass "console=..." option in command
line and second is to call add_preferred_console(char *name, int idx,
char *options). As it is clear from the signature, the function
requires the name of the driver (like "ttyS") and the line id. On the
other hand, the SPCR ACPI table describes console by specifying the
address of it's registers or PCI Device ID / PCI Vendor ID or PCI Bus
Number / PCI Device Number. So to use this function we would need to
have a method to translate this info to the name of terminal and line
index. I could not figure out any way to do that.

I'm not sure how this answers my question.

It does not.  For the actual answer please scroll down.

Which existing drivers/arch setup have you studied to conclude that
the existing console mechanisms don't work? 

I studied how add_preferred_console() is used in drivers/of/base.c,
grepped the tree for it and studied each instance.
Almost everything I see is dumb calls to this 
function with hardcoded tty name and line index.  I don't see 
how this can help.

Have you actually looked
at the in-tree callers of add_preferred_console()?

Yes I have. It looks like you are implying that there is some drivers/arch
setup that would help to implement this correctly. Could you please
give me a reference to it?

quoted

In the initial version of the patch after getting the reference to the
SPCR ACPI table the full tree of ACPI devices was searched to find any
device with the same address.  When uart_add_one_port() was called
to register a new serial port, the ACPI companion of this port was
compared to the found device. If it was the same device, the code
called add_preferred_console() (the terminal name and line index are
known in uart_add_one_port()).

Yeah, I wasn't a fan of that.

But I think it was a bad choice to pick SPCR as table format, in the
first place. At least DBG2 has the actual ACPI device identifier :/

I am working on parsing DBG2 to implement earlycon based on 
info from it.  As I understand,
- SPCR specifies which existing console should be enabled (= made preferred).
- DBG2 specifies how kernel can add a new earlycon to the system.
These are two differend subsystems and both make sense.

Also I don't understand how having (optional) ACPI device identifier
in DBG2 table can help to implement earlycon introduction.

quoted

This original approach had two problems: 

    1) It works with the SPCR tables that describe consoles only by
the address of the registers. I do not think that consoles that are
described by PCI info will appear in the near future, but decided to
implement this in a generic way. I would like to discuss if this
decision was good.

    2) Wrong order of initialization.  Many console drivers have already
been registered by the time uart_add_one_port() adds an item to the
console_cmdline array.  There is a similar problem with my
implementation,  but having a dedicated acpi_match() callback I
believe made it simpler to circumwent.

I don't see how the "wrong order of initialization" and the need for
acpi_match() correlate. What do you mean by "wrong order"? What is the
"right order"?

There is a race between initialization/registration of consoles and 
parsing SPCR table.  By the time the console is registered we should 
have SPCR table parsed and add_preferred_console() called.

In the original submission add_preferred_console() was called from
uart registration code, that requires to parse ACPI table very early
(and nobody can say how early, because uarts can be registered very
early.  pl011 is initialized with arch_initcall() for example).

I decided to fix this with retrying registration of consoles after
ACPI is parsed.  I do not like it either, but it is the simplest 
solution I could suggest.  But it's quite difficult do implement 
such deferring code in the uart registration and, more important,
it is wrong as there may be non-uart consoles.

So acpi_match() is a part of registration retrying mechanism and
the right place for it is at console registration.

quoted

That's why I believe we need to add a new funcion pointer to struct
console. On the other hand, I do not understand which existing
structure you are referring.

quoted

How is this going to work with earlycon?

If an earlycon that matches SPCR is being registered, the code will enable it.

I think you should review how and when an earlycon is specified, initialized
and registered before you conclude that this will magically work.

I reviewed that again and the only issue that I can imagine is that
ACPI can not make earlycon preferred.  Is it that you are afraid of?
I believe it should not.  What problems do you see?

Thank you
Aleksey Makarov

quoted

While it is harmless. Even so I will check for earlycon in the next version
of the patch set, thank you.

quoted

This commit log is missing the reasoning behind adding locks,
refactoring into delete_from_console_list(), and retry loops.

I will add this to the next verion of the series.

Thank you
Aleksey Makarov

quoted

quoted

[1]
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.den0044a/index.html

[2] http://msdn.microsoft.com/en-us/library/windows/hardware/dn639131(v=vs.85).aspx

Signed-off-by: Aleksey Makarov <redacted>

[ .. ]