[PATCH] ARM: dts: vf-colibri-eval-v3: Use enable-gpios for BL_ON
flat view
From: Bhuvanchandra DV <hidden>
Date: 2016-01-27 18:44:08
Also in:
linux-devicetree, lkml
Ping! On 01/09/2016 12:29 PM, Bhuvanchandra DV wrote:
quoted hunk ↗ jump to hunk
Use pwm-backlight driver 'enable-gpios' property for backlight on/off control. Signed-off-by: Bhuvanchandra DV <redacted> --- arch/arm/boot/dts/vf-colibri.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+)diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index e5949b9..1c0da05 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi@@ -10,7 +10,10 @@ / { bl: backlight { compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_bl_on>; pwms = <&pwm0 0 5000000 0>; + enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; status = "disabled"; }; };@@ -169,6 +172,12 @@ >; }; + pinctrl_gpio_bl_on: gpio_bl_on { + fsl,pins = < + VF610_PAD_PTC0__GPIO_45 0x22ef + >; + }; + pinctrl_i2c0: i2c0grp { fsl,pins = < VF610_PAD_PTB14__I2C0_SCL 0x37ff
-- Best regards, Bhuvan