On Sunday 20 December 2015 17:54:43 Robert Jarzmik wrote:

Add a defconfig covering all known pxa board, ie. all selectable machine
files in arch/arm/mach-pxa/*.c.

This defconfig was built by doing :
 - aggregation of all known defconfigs by cat
        am200epdkit_defconfig
        cm_x2xx_defconfig
        cm_x300_defconfig
        colibri_pxa270_defconfig
        colibri_pxa300_defconfig
        corgi_defconfig
        em_x270_defconfig
        eseries_pxa_defconfig
        ezx_defconfig
        h5000_defconfig
        imote2_defconfig
        lpd270_defconfig
        lubbock_defconfig
        magician_defconfig
        mainstone_defconfig
        multi_v7_defconfig
        palmz72_defconfig
        pcm027_defconfig
        pxa168_defconfig
        pxa255-idp_defconfig
        pxa3xx_defconfig
        pxa910_defconfig
        raumfeld_defconfig
        spitz_defconfig
        trizeps4_defconfig
        viper_defconfig
        xcep_defconfig
        zeus_defconfig
 - manual make menuconfig to ensure :
   - all pxa implementation were selected
   - all drivers were transformed into modules rather than builtin
     => as a consequence this single kernel will rely on an initramfs
     => as kernel size matters on pxa, each machine can take the subset
        of modules required for it to work
 - CONFIG_PXA_SHARPSL was disabled
   This breaks the boot very early on any non Sharp platform, see
   head-sharpsl.S

This defconfig was tested as booting up to the login phase on :
 - lubbock (pxa25x)
 - mainstone (pxa27x)
 - zylonite (pxa3xx)

The completion of this work will require to :
 - parse manually all the arch/arm/mach-pxa/*c files, look for all
   platform devices added, and verify they are all in pxa_defconfig
 - do the same to ensure all pxa specific drivers (leds, gpio, ...) are
   included

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

Sorry for the late reply. I think this is great and I'd like to just apply it.
Can you re-send to arm at kernel.org if you're happy with that?

Looking at your description above, I see that you included pxa168_defconfig
and pxa910_defconfig as well, but they are mach-mmp rather than mach-pxa.
Can you check if that has added in anything we don't want?

	Arnd