[PATCH] soc: mediatek: PMIC wrap: Clear the vldclr if state machine is stay on FSM_VLDCLR state.
From: matthias.bgg@gmail.com (Matthias Brugger)
Date: 2015-12-30 18:02:47
Also in:
linux-mediatek, lkml
On 22/12/15 08:51, Henry Chen wrote:
quoted hunk ↗ jump to hunk
Sometimes PMIC is too busy to send data in time to cause pmic wrap timeout, because pmic wrap is waiting for FSM_VLDCLR after finishing WACS2_CMD. It just return error when issue happened, so the state machine will stay on FSM_VLDCLR state when data send back later by PMIC and timeout again in next time because pmic wrap waiting for FSM_IDLE state at the begining of the read/write function. Clear the vldclr when timeout if state machine is stay on FSM_VLDCLR. Signed-off-by: Henry Chen <redacted> --- drivers/soc/mediatek/mtk-pmic-wrap.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c index 105597a..ccd5337 100644 --- a/drivers/soc/mediatek/mtk-pmic-wrap.c +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c@@ -443,10 +443,16 @@ static int pwrap_wait_for_state(struct pmic_wrapper *wrp, static int pwrap_write(struct pmic_wrapper *wrp, u32 adr, u32 wdata) { int ret; + u32 val; ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle); - if (ret) + if (ret) { + /* Clear vldclr bit if state is on the WACS_FSM_WFVLDCLR */ + val = pwrap_readl(wrp, PWRAP_WACS2_RDATA); + if (PWRAP_GET_WACS_FSM(val) == PWRAP_WACS_FSM_WFVLDCLR) + pwrap_writel(wrp, 1, PWRAP_WACS2_VLDCLR); return ret; + }
I would prefer to have this encapsulated in a (inline) function. Maybe with better description then just the one line comment. Thanks, Matthias
quoted hunk ↗ jump to hunk
pwrap_writel(wrp, (1 << 31) | ((adr >> 1) << 16) | wdata, PWRAP_WACS2_CMD);@@ -457,10 +463,16 @@ static int pwrap_write(struct pmic_wrapper *wrp, u32 adr, u32 wdata) static int pwrap_read(struct pmic_wrapper *wrp, u32 adr, u32 *rdata) { int ret; + u32 val; ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle); - if (ret) + if (ret) { + /* Clear vldclr bit if state is on the WACS_FSM_WFVLDCLR */ + val = pwrap_readl(wrp, PWRAP_WACS2_RDATA); + if (PWRAP_GET_WACS_FSM(val) == PWRAP_WACS_FSM_WFVLDCLR) + pwrap_writel(wrp, 1, PWRAP_WACS2_VLDCLR); return ret; + } pwrap_writel(wrp, (adr >> 1) << 16, PWRAP_WACS2_CMD);