[PATCH v2 2/3] arm: boot: dts: beaglex15: Remove ID GPIO
From: cw00.choi@samsung.com (Chanwoo Choi)
Date: 2015-12-30 00:56:05
Also in:
linux-devicetree, linux-omap, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Felipe Balbi <redacted> According to latest schematics [1], this board leaves ID pin floating. It's not connected to anything at all. So let's remove it. [1] https://github.com/beagleboard/beagleboard-x15/blob/master/BeagleBoard-X15_RevA2.pdf Signed-off-by: Felipe Balbi <redacted> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> --- arch/arm/boot/dts/am57xx-beagle-x15.dts | 2 -- 1 file changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index d9ba6b879fc1..be4990608c77 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts@@ -560,8 +560,6 @@ extcon_usb2: tps659038_usb { compatible = "ti,palmas-usb-vid"; ti,enable-vbus-detection; - ti,enable-id-detection; - id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>; }; };
--
1.9.1