Le mardi 29 d?cembre 2015 ? 14:02 -0600, Rob Herring a ?crit :

On Wed, Dec 23, 2015 at 11:58:37AM +0100, Paul Kocialkowski wrote:

quoted

LP872x regulators are made active via the EN pin, which might be hooked to a
GPIO. This adds support for driving the GPIO high when the driver is in use.

Signed-off-by: Paul Kocialkowski <redacted>
---
 .../devicetree/bindings/regulator/lp872x.txt       |  1 +
 drivers/regulator/lp872x.c                         | 33 ++++++++++++++++++++--
 include/linux/regulator/lp872x.h                   |  2 ++
 3 files changed, 33 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/lp872x.txt b/Documentation/devicetree/bindings/regulator/lp872x.txt
index 7818318..0559c25 100644
--- a/Documentation/devicetree/bindings/regulator/lp872x.txt
+++ b/Documentation/devicetree/bindings/regulator/lp872x.txt

@@ -28,6 +28,7 @@ Optional properties:
   - ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices.
   - ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2.
   - ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH.
+  - ti,enable-gpio: GPIO specifier for EN pin control of LP872x devices.

Should be "-gpios" instead of "-gpio".

Care to comment why? There is only one GPIO that can be used here, since
there is only one single EN pin. I thought this matched what is done
already with "ti,dvs-gpio".

Thanks!
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: This is a digitally signed message part
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151229/e2fc963f/attachment.sig>