[PATCH v5 3/3] arm64: dts: mt8173: Add dynamic power node.
From: Dawei Chien <hidden>
Date: 2015-12-16 03:59:45
Also in:
linux-devicetree, linux-mediatek, linux-pm, lkml
Subsystem:
arm/mediatek soc support, the rest · Maintainers:
Matthias Brugger, AngeloGioacchino Del Regno, Linus Torvalds
This device node is for calculating dynamic power in mW. Since mt8173 has two clusters, there are two dynamic power coefficient as well. Signed-off-by: Dawei Chien <redacted> --- This patch is base on patchset: https://lkml.org/lkml/2015/11/17/251 --- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 4114cee..33fabe4 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi@@ -71,6 +71,7 @@ #cooling-cells = <2>; #cooling-min-level = <0>; #cooling-max-level = <7>; + dynamic-power-coefficient = <263>; }; cpu1: cpu at 1 {
@@ -95,6 +96,7 @@ #cooling-cells = <2>; #cooling-min-level = <0>; #cooling-max-level = <7>; + dynamic-power-coefficient = <263>; }; cpu2: cpu at 100 {
@@ -119,6 +121,7 @@ #cooling-cells = <2>; #cooling-min-level = <0>; #cooling-max-level = <7>; + dynamic-power-coefficient = <530>; }; cpu3: cpu at 101 {
@@ -143,6 +146,7 @@ #cooling-cells = <2>; #cooling-min-level = <0>; #cooling-max-level = <7>; + dynamic-power-coefficient = <530>; }; idle-states {
--
1.7.9.5