[PATCH v5 4/5] ARM: dts: DRA7: add entry for qspi mmap region
From: vigneshr@ti.com (Vignesh R)
Date: 2015-12-11 04:10:58
Also in:
linux-devicetree, linux-omap, linux-spi, lkml
Subsystem:
open firmware and flattened device tree bindings, spi subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Mark Brown, Linus Torvalds
Add qspi memory mapped region entries for DRA7xx based SoCs. Also, update the binding documents for the controller to document this change. Signed-off-by: Vignesh R <vigneshr@ti.com> --- v5: use syscon to access scm register. Documentation/devicetree/bindings/spi/ti_qspi.txt | 17 +++++++++++++++++ arch/arm/boot/dts/dra7.dtsi | 6 ++++-- 2 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/spi/ti_qspi.txt b/Documentation/devicetree/bindings/spi/ti_qspi.txt
index 601a360531a5..809c3f334316 100644
--- a/Documentation/devicetree/bindings/spi/ti_qspi.txt
+++ b/Documentation/devicetree/bindings/spi/ti_qspi.txt@@ -15,6 +15,10 @@ Recommended properties: - spi-max-frequency: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt +Optional properties: +- syscon-chipselects: Handle to system control region contains QSPI + chipselect register and offset of that register. + Example: qspi: qspi at 4b300000 {
@@ -26,3 +30,16 @@ qspi: qspi at 4b300000 { spi-max-frequency = <25000000>; ti,hwmods = "qspi"; }; + +For dra7xx: +qspi: qspi at 4b300000 { + compatible = "ti,dra7xxx-qspi"; + reg = <0x4b300000 0x100>, + <0x5c000000 0x4000000>, + reg-names = "qspi_base", "qspi_mmap"; + syscon-chipselects = <&scm_conf 0x558>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <48000000>; + ti,hwmods = "qspi"; +};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index fe99231cbde5..be91c7781c07 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi@@ -1153,8 +1153,10 @@ qspi: qspi at 4b300000 { compatible = "ti,dra7xxx-qspi"; - reg = <0x4b300000 0x100>; - reg-names = "qspi_base"; + reg = <0x4b300000 0x100>, + <0x5c000000 0x4000000>; + reg-names = "qspi_base", "qspi_mmap"; + syscon-chipselects = <&scm_conf 0x558>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "qspi";
--
2.6.3