[PATCH v4 5/5] ARM: dts: ifc6410: enable pcie dt node for this board
From: Stanimir Varbanov <hidden>
Date: 2015-12-03 13:36:23
Also in:
linux-arm-msm, linux-devicetree, linux-pci, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Enable pcie dt node and fill pcie dt node with regulator, pinctrl and reset gpio, to use the pcie on the ifc6410 board. Signed-off-by: Stanimir Varbanov <redacted> --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 11ac608b6d50..f203b94ee460 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts@@ -47,6 +47,18 @@ bias-disable; }; }; + + pcie_pins: pcie_pinmux { + mux { + pins = "gpio27"; + function = "gpio"; + }; + conf { + pins = "gpio27"; + drive-strength = <12>; + bias-disable; + }; + }; }; rpm at 108000 {
@@ -123,6 +135,10 @@ pm8921_lvs1: lvs1 { bias-pull-down; }; + + pm8921_lvs6: lvs6 { + bias-pull-down; + }; }; };
@@ -231,6 +247,16 @@ status = "okay"; }; + pci at 1b500000 { + status = "ok"; + vdda-supply = <&pm8921_s3>; + vdda_phy-supply = <&pm8921_lvs6>; + vdda_refclk-supply = <&ext_3p3v>; + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + }; + qcom,ssbi at 500000 { pmic at 0 { gpio at 150 {
--
1.7.9.5