On 12/01/2015 08:11 AM, Rajendra Nayak wrote:

Add new dtsi and dts files for the apq8096 dragonboards with just
a serial device used as debug console

While at it, also rearrange the Makefile so we have one dtb per line
so as to be consistent with whats done on other platforms.

Signed-off-by: Rajendra Nayak <redacted>
---
 arch/arm64/boot/dts/qcom/Makefile                 |  4 ++-
 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts  | 21 ++++++++++++++++
 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi | 30 +++++++++++++++++++++++
 3 files changed, 54 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts
 create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi

One problem.  The board you have is not called a dragonboard.  Let's
check with the marketing folks on what they're calling it now.  We need
to explicitly avoid using dragonboard here as that name applies to a
different class of products.  Thanks.

- Bryan


-- 
Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a
Linux Foundation Collaborative Project