[PATCH] ARM: dts: Kirkwood: Fix QNAP TS219 power-off
From: Gregory CLEMENT <hidden>
Date: 2015-11-19 10:29:50
Hi Andrew and Helmut, On mer., nov. 11 2015, Andrew Lunn [off-list ref] wrote:
From: Helmut Klein <redacted>
The "reg" entry in the "poweroff" section of "kirkwood-ts219.dtsi"
addressed the wrong uart (0 = console). This patch changes the address
to select uart 1, which is the uart connected to the pic
microcontroller, which can switch the device off.
Signed-off-by: Helmut Klein <redacted>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 4350a47bbac3 ("ARM: Kirkwood: Make use of the QNAP Power off
driver.")Applied on mvebu/fixes Thanks, Gregory
quoted hunk
--- Hi Helmut I made a few minor changes to your patch: 1) Made subject line consistent with other patches to kirkwood-ts219.dtsi 2) Added a Fixes: tag, so that it gets backported to stable 3) Put comments after the ---, so they don't land in the change log. Hi Gregory This is a fix, i guess too late for this merge window, so please could you send it after -rc1 is out? --- arch/arm/boot/dts/kirkwood-ts219.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index c56ab6bbfe3c..0e46560551f4 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi@@ -40,7 +40,7 @@ }; poweroff at 12100 { compatible = "qnap,power-off"; - reg = <0x12000 0x100>; + reg = <0x12100 0x100>; clocks = <&gate_clk 7>; }; spi at 10600 {-- 2.6.1
-- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com