On Thu, Nov 05, 2015 at 09:28:23AM +0100, Linus Walleij wrote:

On Tue, Nov 3, 2015 at 3:51 PM, Russell King
[off-list ref] wrote:

quoted

Add (incomplete) support for the ZTE UART to the AMBA PL011 driver.
This is similar to the ARM and ST variants, except it has a different
register address layout, and requires 32-bit accesses to the registers.
Use the newly introduced register tables and access size support to
cope with these differences.

Signed-off-by: Russell King <redacted>

I applied the whole series, 1-11 and tested on Ux500 (ST Micro variant)
and on the ARM RealView PB11MPCore.

It works like a charm. I also like the looks of this transformation.
Tested-by: Linus Walleij <redacted>

As I mentioned, the change in pl011_putc() needs undoing (I've already
modified that in my series).  Also, I'll try switching to the relaxed
accessors and checking that.  Thanks for the tested-by though, can I
assume that you're happy I add that even with the pl011_putc() change
undone?

-- 
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.