[PATCH 14/18] ARM: am57xx: sbc-am57x: dts: add EEPROM support
From: Dmitry Lifshitz <hidden>
Date: 2015-11-25 06:39:46
Also in:
linux-devicetree, linux-omap
Subsystem:
the rest · Maintainer:
Linus Torvalds
On-board EEPROM chip is used for storing a board production info. Add carrier board EEPROM support (over I2C5 bus). Signed-off-by: Dmitry Lifshitz <redacted> --- arch/arm/boot/dts/am57xx-sbc-am57x.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
index b92650b..7b65efb 100644
--- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts@@ -44,6 +44,13 @@ DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ >; }; + + i2c5_pins_default: i2c5_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT| MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ + DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT| MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ + >; + }; }; &uart3 {
@@ -71,3 +78,16 @@ pinctrl-names = "default"; pinctrl-0 = <&usb1_pins>; }; + +&i2c5 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins_default>; + clock-frequency = <400000>; + + eeprom_base: atmel at 50 { + compatible = "atmel,24c08"; + reg = <0x50>; + pagesize = <16>; + }; +};
--
1.9.1