[PATCH 17/18] ARM: am57xx: compulab-sb-som: dts: add HDMI connector

Add HDMI connector node without a valid input endpoint.

CompuLab SB-SOM is a carrier board, hence the endpoint
should be added in the board DT with a valid HDMI output.

Signed-off-by: Dmitry Lifshitz <redacted>
Acked-by: Igor Grinberg <redacted>
---
 arch/arm/boot/dts/compulab-sb-som.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/compulab-sb-som.dtsi b/arch/arm/boot/dts/compulab-sb-som.dtsi
index 402a143..93d7e23 100644
--- a/arch/arm/boot/dts/compulab-sb-som.dtsi
+++ b/arch/arm/boot/dts/compulab-sb-som.dtsi

@@ -39,4 +39,11 @@
 			pixelclk-active = <1>;
 		};
 	};
+
+	hdmi_conn: connector at 0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+	};
 };

-- 
1.9.1