[PATCH v2] arm, am335x: add support for the bosch shc board
From: Heiko Schocher <hidden>
Date: 2015-11-30 06:51:10
Also in:
linux-devicetree, linux-omap, lkml
Hello all, Am 18.11.2015 um 09:24 schrieb Heiko Schocher:
Hello Dave, Am 17.11.2015 um 22:29 schrieb Dave Gerlach:quoted
Hi, On 11/17/2015 02:24 AM, Heiko Schocher wrote:quoted
add support for the am335x based shc board. UART: 0-2 and 4 DRAM: 512 MiB MMC: OMAP SD/MMC: 0 @ 26 MHz OMAP SD/MMC: 1 @ 26 MHz I2C: at24 eeprom, pcf8563 USB: USB1 (host) Signed-off-by: Heiko Schocher <redacted> --- The following patches are needed to get all working for the shc board: - disable clkout on pcf8563 accepted. http://www.spinics.net/lists/devicetree/msg98542.html - leds: leds-gpio: add shutdown function accepted. https://lkml.org/lkml/2015/10/13/169 - net: phy: smsc: disable energy detect mode accepted [PATCH v2 2/2] net: phy: smsc: disable energy detect mode https://lkml.org/lkml/2015/10/17/2 [PATCH v2 1/2] drivers: net: cpsw: add phy-handle parsing https://lkml.org/lkml/2015/10/17/4 - ARM: OMAP2+: omap_hwmod: Introduce ti,no-init dt property http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/328204.html @Dave: What is the current state of this patch? I have the same problem here on this am335x based boardA different approach is being taken for resolving the issue of rtc hwmod on am43x epos evm [1], which is what I was attempting to solve with the patch you have linked. We decided to avoid changing omap_hwmod code and I haven't been pursuing the ti,no-init flag anymore.Maybe I overlook something, but I cannot see, how [1] solves the RTC hwmod problem on am335x SoC based boards. Not all boards have this problem, so the RTC hwmod cannot be disabled for all am335x boards ... It must be somehow configurable for boards ... I have am335x boards which use the rtc from the SoC
gentle ping ... No more comments on this patch? Is it Ok for mainline or are there more issues? bye, Heiko
quoted
Regards, Dave [1] http://www.spinics.net/lists/linux-omap/msg121987.htmlbye, Heiko
-- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany