[PATCH v2 4/5] media: atmel-isi: setup YCC_SWAP correctly when using preview path
STALE3990d
From: Josh Wu <hidden>
Date: 2015-11-03 05:40:26
Also in:
linux-media, lkml
Subsystem:
media input infrastructure (v4l/dvb), the rest · Maintainers:
Mauro Carvalho Chehab, Linus Torvalds
Revision v2 of 2 in this series.
Revisions (2)
- v1 [diff vs current]
- v2 current
The preview path only can convert UYVY format to RGB data. To make preview path work correctly, we need to set up YCC_SWAP according to sensor output and convert them to UYVY. Signed-off-by: Josh Wu <redacted> --- Changes in v2: - remove cfg2_yuv_swap for rgb format - correct the comment style drivers/media/platform/soc_camera/atmel-isi.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c
index ae82068..826d04e 100644
--- a/drivers/media/platform/soc_camera/atmel-isi.c
+++ b/drivers/media/platform/soc_camera/atmel-isi.c@@ -117,6 +117,20 @@ static u32 setup_cfg2_yuv_swap(struct atmel_isi *isi, case MEDIA_BUS_FMT_YVYU8_2X8: return ISI_CFG2_YCC_SWAP_MODE_1; } + } else if (xlate->host_fmt->fourcc == V4L2_PIX_FMT_RGB565) { + /* + * Preview path is enabled, it will convert UYVY to RGB format. + * But if sensor output format is not UYVY, we need to set + * YCC_SWAP_MODE to convert it as UYVY. + */ + switch (xlate->code) { + case MEDIA_BUS_FMT_VYUY8_2X8: + return ISI_CFG2_YCC_SWAP_MODE_1; + case MEDIA_BUS_FMT_YUYV8_2X8: + return ISI_CFG2_YCC_SWAP_MODE_2; + case MEDIA_BUS_FMT_YVYU8_2X8: + return ISI_CFG2_YCC_SWAP_MODE_3; + } } /*
--
1.9.1