[PATCH v4 06/12] doc/bindings: Update GPIO devicetree binding documentation for LS2080A
From: Bhupesh Sharma <hidden>
Date: 2015-10-23 19:31:55
Also in:
linux-clk
Subsystem:
gpio subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Linus Walleij, Bartosz Golaszewski, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Update the FSL, GPIO binding documentation to add support for GPIO controller found on Freescale's LS2080A platform. Signed-off-by: Liu Gang <redacted> Signed-off-by: Bhupesh Sharma <redacted> --- .../devicetree/bindings/gpio/gpio-mpc8xxx.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
index 805ddcd..f2455c5 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt@@ -1,9 +1,9 @@ -* Freescale MPC512x/MPC8xxx GPIO controller +* Freescale MPC512x/MPC8xxx/Layerscape GPIO controller Required properties: - compatible : Should be "fsl,<soc>-gpio" The following <soc>s are known to be supported: - mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq + mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq. - reg : Address and length of the register set for the device - interrupts : Should be the port interrupt shared by all 32 pins. - #gpio-cells : Should be two. The first cell is the pin number and
--
1.7.9.5