[PATCH v4 4/6] reset: sunxi: Add Allwinner H3 bus resets
From: Jens Kuske <hidden>
Date: 2015-10-27 16:51:41
Also in:
linux-devicetree, lkml
Subsystem:
open firmware and flattened device tree bindings, reset controller framework, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Philipp Zabel, Linus Torvalds
The H3 bus resets have some holes between the registers, so we add an of_xlate() function to skip them according to the datasheet. Signed-off-by: Jens Kuske <redacted> --- .../bindings/reset/allwinner,sunxi-clock-reset.txt | 1 + drivers/reset/reset-sunxi.c | 30 +++++++++++++++++++--- 2 files changed, 28 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt
index c8f7757..e11f023 100644
--- a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt
+++ b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt@@ -8,6 +8,7 @@ Required properties: - compatible: Should be one of the following: "allwinner,sun6i-a31-ahb1-reset" "allwinner,sun6i-a31-clock-reset" + "allwinner,sun8i-h3-bus-reset" - reg: should be register base and length as documented in the datasheet - #reset-cells: 1, see below
diff --git a/drivers/reset/reset-sunxi.c b/drivers/reset/reset-sunxi.c
index 3d95c87..c91e146 100644
--- a/drivers/reset/reset-sunxi.c
+++ b/drivers/reset/reset-sunxi.c@@ -75,7 +75,9 @@ static struct reset_control_ops sunxi_reset_ops = { .deassert = sunxi_reset_deassert, }; -static int sunxi_reset_init(struct device_node *np) +static int sunxi_reset_init(struct device_node *np, + int (*of_xlate)(struct reset_controller_dev *rcdev, + const struct of_phandle_args *reset_spec)) { struct sunxi_reset_data *data; struct resource res;
@@ -108,6 +110,7 @@ static int sunxi_reset_init(struct device_node *np) data->rcdev.nr_resets = size * 32; data->rcdev.ops = &sunxi_reset_ops; data->rcdev.of_node = np; + data->rcdev.of_xlate = of_xlate; reset_controller_register(&data->rcdev); return 0;
@@ -117,6 +120,21 @@ err_alloc: return ret; }; +static int sun8i_h3_bus_reset_xlate(struct reset_controller_dev *rcdev, + const struct of_phandle_args *reset_spec) +{ + unsigned int index = reset_spec->args[0]; + + if (index < 96) + return index; + else if (index < 128) + return index + 32; + else if (index < 160) + return index + 64; + else + return -EINVAL; +} + /* * These are the reset controller we need to initialize early on in * our system, before we can even think of using a regular device
@@ -124,15 +142,21 @@ err_alloc: */ static const struct of_device_id sunxi_early_reset_dt_ids[] __initdata = { { .compatible = "allwinner,sun6i-a31-ahb1-reset", }, + { .compatible = "allwinner,sun8i-h3-bus-reset", .data = sun8i_h3_bus_reset_xlate, }, { /* sentinel */ }, }; void __init sun6i_reset_init(void) { struct device_node *np; + const struct of_device_id *match; + int (*of_xlate)(struct reset_controller_dev *rcdev, + const struct of_phandle_args *reset_spec); - for_each_matching_node(np, sunxi_early_reset_dt_ids) - sunxi_reset_init(np); + for_each_matching_node_and_match(np, sunxi_early_reset_dt_ids, &match) { + of_xlate = match->data; + sunxi_reset_init(np, of_xlate); + } } /*
--
2.6.2