On Sat, Oct 24, 2015 at 12:56 AM, Karsten Merker [off-list ref] wrote:

On Fri, Oct 23, 2015 at 11:56:35PM +0800, Chen-Yu Tsai wrote:

quoted

On Fri, Oct 23, 2015 at 11:46 PM, Chen-Yu Tsai [off-list ref] wrote:

quoted

On Fri, Oct 23, 2015 at 10:53 PM, Karsten Merker [off-list ref] wrote:

quoted

On Fri, Oct 23, 2015 at 11:50:41AM +0800, Chen-Yu Tsai wrote:

[...]

quoted

quoted

quoted

quoted

+/ {
+     model = "MSI Primo81 tablet";
+     compatible = "msi,primo81", "allwinner,sun6i-a31s";
+};

[...]

quoted

quoted

quoted

quoted

+&i2c1 {
+     pinctrl-names = "default";
+     pinctrl-0 = <&i2c1_pins_a>;
+     status = "okay";
+
+     ctp at 5d {
+             pinctrl-names = "default";
+             pinctrl-0 = <&gt911_int_primo81>;
+             compatible = "goodix,gt911";
+             reg = <0x5d>;
+             interrupt-parent = <&pio>;
+             interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */

I'd like to add a

                touchscreen-swapped-x-y = "true";

as described in
Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
here, as the display is in portrait mode while the touchscreen is
in landscape mode and needs to have the x and y axes swapped to
work in the same coordinate system as the display.

Regarding the driver side: the goodix driver in kernel 4.3
doesn't yet support this property, but patches to add support for
it are on the linux-input list and should hopefully make it into
kernel 4.4.

The DTS is already in Maxime's tree, and in sunxi-next. Feel free to
send a follow-up patch adding them. I was waiting for those patches
to be merged.

Sorry, spoke too soon. Maxime hasn't pushed it out yet. Could you send
a patch adding touchscreen-swapped-x-y for Maxime to squash in?

I'm happy to do so, but I have just stumbled over a problem with
actually building the dtb for testing - it fails with

  arch/arm/boot/dts/sun6i-a31s-primo81.dts:242.1-14 Label or path simplefb_lcd not found

The dts references simplefb_lcd:

+&simplefb_lcd {
+       vcc-lcd-supply = <&reg_dc1sw>;
+       vdd-mipi-bridge-supply = <&reg_eldo3>;
+};

but I don't see where it would be defined. This is on the current
sunxi/for-next branch of
https://git.kernel.org/cgit/linux/kernel/git/mripard/linux.git
with the Primo81 dts patch on top. Am I perhaps missing some
required additional patch here?

Yes. The previous patch that adds labels to the simplefb nodes.
Both patches are now in sunxi/for-next in Maxime's tree now.

ChenYu