[PATCH v2 1/2] dt-bindings: Add the "init" pinctrl in this document
From: robh+dt@kernel.org (Rob Herring)
Date: 2015-10-22 01:34:36
Also in:
linux-devicetree, linux-pm, linux-rockchip, lkml
On Wed, Oct 21, 2015 at 8:25 PM, Caesar Wang [off-list ref] wrote:
The "init" pinctrl is defined we'll set pinctrl to this state before probe and then "default" after probe. Add the "init" pinctrl as the OTP gpio state, since we need switch the pin to gpio state before the TSADC controller is reset. As I know, the TSADC controller is reset, the tshut polarity will be a *low* signal in a short period of time for some devices. Says: The TSADC get the temperature on rockchip thermal. If T(current temperature) < (setting temperature), the OTP output the *high* signal. If T(current temperature) > (setting temperature), the OTP output the *low* Signal. In some cases, the OTP pin is connected to the PMIC, maybe the PMIC can accept the reset response time to avoid this issue. In other words, the system will be always reboot if we make the OTP pin is connected the others IC to control the power. Signed-off-by: Caesar Wang <redacted> Reviewed-by: Douglas Anderson <dianders@chromium.org> --- Changes in v2: - As the Rob comments, add the 'init' pinctrl more decription in document.
Where?
quoted hunk ↗ jump to hunk
- fix the subject to make more obvious in PATCH[1/2] Series-changes: 1 - As the Doug comments, add the 'init' property to sync document. Changes in v1: None Documentation/devicetree/bindings/thermal/rockchip-thermal.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt index ef802de..28e84f7 100644 --- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt@@ -27,8 +27,9 @@ tsadc: tsadc at ff280000 { clock-names = "tsadc", "apb_pclk"; resets = <&cru SRST_TSADC>; reset-names = "tsadc-apb"; - pinctrl-names = "default"; - pinctrl-0 = <&otp_out>; + pinctrl-names = "init", "default"; + pinctrl-0 = <&otp_gpio>; + pinctrl-1 = <&otp_out>; #thermal-sensor-cells = <1>; rockchip,hw-tshut-temp = <95000>; rockchip,hw-tshut-mode = <0>; --1.9.1