[PATCH 5/9] Documentation: dt-bindings: Add IRQ related properties of STM32 pinctrl
From: mcoquelin.stm32@gmail.com (Maxime Coquelin)
Date: 2015-10-17 17:26:23
Also in:
linux-devicetree, linux-gpio, lkml
Subsystem:
open firmware and flattened device tree bindings, pin control subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij, Linus Torvalds
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> --- Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
index 7b4800c..dd95bec 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt@@ -13,6 +13,9 @@ Required properies: - #size-cells : The value of this property must be 1 - ranges : defines mapping between pin controller node (parent) to gpio-bank node (children). + - interrupt-parent: phandle of the interrupt parent to which the external + GPIO interrupts are forwarded to. + - st,syscfg: phandle of the syscfg node used for IRQ mux selection. - pins-are-numbered: Specify the subnodes are using numbered pinmux to specify pins.
--
1.9.1