On 16.10.2015 13:40, Jisheng Zhang wrote:

On Thu, 15 Oct 2015 23:41:22 +0200
Sebastian Hesselbarth [off-list ref] wrote:

quoted

On 12.10.2015 07:46, Jisheng Zhang wrote:

quoted

Commit 8afdc9cca27f ("mmc: sdhci-pxav3: Get optional core clock") adds
additional optional clock support, but the clock names  isn't correct.
The current "io" clock is really the PXAv3 SDHCI IP's "core" clock
which is manadatory. The current "core" clock is really the IP's "axi"
clock which is optional.

Signed-off-by: Jisheng Zhang <redacted>
---

[...]

quoted

Please split the DT changes from the driver changes.

Such split will break berlin SDHC functionality, I'm not sure whether this is
acceptable.

I am not going to funnel any driver stuff through berlin-tree anymore
if it isn't really neccessary.

[...]

quoted

quoted

   - clocks: Array of clocks required for SDHCI; requires at least one for
-    I/O clock.
+    core clock.
   - clock-names: Array of names corresponding to clocks property; shall be
-    "io" for I/O clock and "core" for optional core clock.
+    "core" for core clock and "axi" for optional axi clock.

s/axi/bus/ ?

HW call this clk as axi, "bus" seems more generic, right?

Yes, please pick the generic name. Given the age of that IP,
I guess it will run on AHB instead of AXI on PXA.

[...]

quoted

quoted

-	pxa->clk_io = devm_clk_get(dev, "io");
-	if (IS_ERR(pxa->clk_io))
-		pxa->clk_io = devm_clk_get(dev, NULL);
-	if (IS_ERR(pxa->clk_io)) {
-		dev_err(dev, "failed to get io clock\n");
-		ret = PTR_ERR(pxa->clk_io);
+	pxa->clk_core = devm_clk_get(dev, "core");

To maintain backward compatibility, we should still

I just grep the kernel source, found that only mrvl berlin SoCs have two clks,
other SoCs just have one clk and don't provide clock name. So the question
here is whether we can break linux backward compatibility for mrvl berlin
SoCs. I think we could for the following reason:

That is the point: do not break it on purpose.

Try to separate DT and driver changes without breaking the tree
in between.

Sebastian

1. rare boards outside mrvl can boot user self-built kernel, most boards should
be protected by trust-chainloader mechanism.

2. mrvl berlin SoCs upgrade linux kernel and dtb at the same time

what do you think?

Is it better to refine patch 2, 3, 4, 5 to make use current "io","core" binding
to clean up the clk's CLK_IGNORE_UNUSED flags? In fact, they doesn't depend
on patch1. Could you please kindly give advice?

Thanks in advance,
Jisheng

quoted

devm_clk_get(dev, "io") here - or even better, first
probe for "io" to catch old binding semantics including
old "core"/"bus" misnaming.

If we detected old semantics, print a warning that
firmware should be updated.

Sebastian

quoted

+	if (IS_ERR(pxa->clk_core))
+		pxa->clk_core = devm_clk_get(dev, NULL);
+	if (IS_ERR(pxa->clk_core)) {
+		dev_err(dev, "failed to get core clock\n");
+		ret = PTR_ERR(pxa->clk_core);
   		goto err_clk_get;
   	}
-	pltfm_host->clk = pxa->clk_io;
-	clk_prepare_enable(pxa->clk_io);
+	pltfm_host->clk = pxa->clk_core;
+	clk_prepare_enable(pxa->clk_core);

-	pxa->clk_core = devm_clk_get(dev, "core");
-	if (!IS_ERR(pxa->clk_core))
-		clk_prepare_enable(pxa->clk_core);
+	pxa->clk_axi = devm_clk_get(dev, "axi");
+	if (!IS_ERR(pxa->clk_axi))
+		clk_prepare_enable(pxa->clk_axi);

   	/* enable 1/8V DDR capable */
   	host->mmc->caps |= MMC_CAP_1_8V_DDR;

@@ -475,8 +475,8 @@ err_add_host:
   err_of_parse:
   err_cd_req:
   err_mbus_win:
-	clk_disable_unprepare(pxa->clk_io);
   	clk_disable_unprepare(pxa->clk_core);
+	clk_disable_unprepare(pxa->clk_axi);
   err_clk_get:
   	sdhci_pltfm_free(pdev);
   	return ret;

@@ -494,8 +494,8 @@ static int sdhci_pxav3_remove(struct platform_device *pdev)

   	sdhci_remove_host(host, 1);

-	clk_disable_unprepare(pxa->clk_io);
   	clk_disable_unprepare(pxa->clk_core);
+	clk_disable_unprepare(pxa->clk_axi);

   	sdhci_pltfm_free(pdev);

@@ -542,9 +542,9 @@ static int sdhci_pxav3_runtime_suspend(struct device *dev)
   	if (ret)
   		return ret;

-	clk_disable_unprepare(pxa->clk_io);
-	if (!IS_ERR(pxa->clk_core))
-		clk_disable_unprepare(pxa->clk_core);
+	clk_disable_unprepare(pxa->clk_core);
+	if (!IS_ERR(pxa->clk_axi))
+		clk_disable_unprepare(pxa->clk_axi);

   	return 0;
   }

@@ -555,9 +555,9 @@ static int sdhci_pxav3_runtime_resume(struct device *dev)
   	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
   	struct sdhci_pxa *pxa = pltfm_host->priv;

-	clk_prepare_enable(pxa->clk_io);
-	if (!IS_ERR(pxa->clk_core))
-		clk_prepare_enable(pxa->clk_core);
+	clk_prepare_enable(pxa->clk_core);
+	if (!IS_ERR(pxa->clk_axi))
+		clk_prepare_enable(pxa->clk_axi);

   	return sdhci_runtime_resume_host(host);
   }