[PATCH v2 2/4] mtd: nand: Allow MTD_NAND_BRCMNAND to be selected for ARM64
From: Anup Patel <hidden>
Date: 2015-10-16 09:09:27
Also in:
linux-devicetree, lkml
Subsystem:
memory technology devices (mtd), nand flash subsystem, the rest · Maintainers:
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, Linus Torvalds
The BRCM NAND driver can be re-used for Broadcom ARM64 SoCs hence this patch updates Kconfig to allow selection of MTD_NAND_BRCMNAND for ARM64. Signed-off-by: Anup Patel <redacted> Reviewed-by: Vikram Prakash <redacted> Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Pramod KUMAR <redacted> Reviewed-by: Scott Branden <sbranden@broadcom.com> --- drivers/mtd/nand/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 3324281..a1b5819 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig@@ -393,7 +393,7 @@ config MTD_NAND_GPMI_NAND config MTD_NAND_BRCMNAND tristate "Broadcom STB NAND controller" - depends on ARM || MIPS + depends on ARM || ARM64 || MIPS help Enables the Broadcom NAND controller driver. The controller was originally designed for Set-Top Box but is used on various BCM7xxx,
--
1.9.1