[PATCH v2 3/7] clk: nsp: add clock support for Broadcom Northstar Plus SoC
From: Jon Mason <hidden>
Date: 2015-10-13 21:09:41
Also in:
linux-clk, linux-devicetree, lkml
Subsystem:
broadcom iproc arm architecture, common clk framework, open firmware and flattened device tree bindings, the rest · Maintainers:
Ray Jui, Scott Branden, Michael Turquette, Stephen Boyd, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The Broadcom Northstar Plus SoC is architected under the iProc architecture. It has the following PLLs: ARMPLL, GENPLL, LCPLL0, all derived from an onboard crystal. Signed-off-by: Jon Mason <redacted> --- drivers/clk/bcm/Makefile | 2 + drivers/clk/bcm/clk-nsp.c | 135 ++++++++++++++++++++++++++++++++++++ include/dt-bindings/clock/bcm-nsp.h | 51 ++++++++++++++ 3 files changed, 188 insertions(+) create mode 100644 drivers/clk/bcm/clk-nsp.c create mode 100644 include/dt-bindings/clock/bcm-nsp.h
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index 8a7a477..e258b28 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile@@ -4,3 +4,5 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o obj-$(CONFIG_ARCH_BCM_CYGNUS) += clk-cygnus.o +obj-$(CONFIG_ARCH_BCM_NSP) += clk-nsp.o +obj-$(CONFIG_ARCH_BCM_5301X) += clk-nsp.o
diff --git a/drivers/clk/bcm/clk-nsp.c b/drivers/clk/bcm/clk-nsp.c
new file mode 100644
index 0000000..bc8ebdcd
--- /dev/null
+++ b/drivers/clk/bcm/clk-nsp.c@@ -0,0 +1,135 @@ +/* + * Copyright (C) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include <dt-bindings/clock/bcm-nsp.h> +#include "clk-iproc.h" + +#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, } + +#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \ + .pwr_shift = ps, .iso_shift = is } + +#define RESET_VAL(o, rs, prs, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \ + .reset_shift = rs, .p_reset_shift = prs, .ki_shift = kis, \ + .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \ + .ka_width = kaw } + +#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \ + .hold_shift = hs, .bypass_shift = bs } + +static void __init nsp_armpll_init(struct device_node *node) +{ + iproc_armpll_setup(node); +} +CLK_OF_DECLARE(nsp_armpll, "brcm,nsp-armpll", nsp_armpll_init); + +static const struct iproc_pll_ctrl genpll = { + .flags = IPROC_CLK_PLL_HAS_NDIV_FRAC | IPROC_CLK_EMBED_PWRCTRL, + .aon = AON_VAL(0x0, 1, 12, 0), + .reset = RESET_VAL(0x0, 11, 10, 4, 3, 0, 4, 7, 3), + .ndiv_int = REG_VAL(0x14, 20, 10), + .ndiv_frac = REG_VAL(0x14, 0, 20), + .pdiv = REG_VAL(0x18, 24, 3), + .status = REG_VAL(0x20, 12, 1), +}; + +static const struct iproc_clk_ctrl genpll_clk[] = { + [BCM_NSP_GENPLL_PHY_CLK] = { + .channel = BCM_NSP_GENPLL_PHY_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x4, 12, 6, 18), + .mdiv = REG_VAL(0x18, 16, 8), + }, + [BCM_NSP_GENPLL_ENET_SW_CLK] = { + .channel = BCM_NSP_GENPLL_ENET_SW_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x4, 13, 7, 19), + .mdiv = REG_VAL(0x18, 8, 8), + }, + [BCM_NSP_GENPLL_USB_PHY_REF_CLK] = { + .channel = BCM_NSP_GENPLL_USB_PHY_REF_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x4, 14, 8, 20), + .mdiv = REG_VAL(0x18, 0, 8), + }, + [BCM_NSP_GENPLL_IPROCFAST_CLK] = { + .channel = BCM_NSP_GENPLL_IPROCFAST_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x4, 15, 9, 21), + .mdiv = REG_VAL(0x1c, 16, 8), + }, + [BCM_NSP_GENPLL_SATA1_CLK] = { + .channel = BCM_NSP_GENPLL_SATA1_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x4, 16, 10, 22), + .mdiv = REG_VAL(0x1c, 8, 8), + }, + [BCM_NSP_GENPLL_SATA2_CLK] = { + .channel = BCM_NSP_GENPLL_SATA2_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x4, 17, 11, 23), + .mdiv = REG_VAL(0x1c, 0, 8), + }, +}; + +static void __init nsp_genpll_clk_init(struct device_node *node) +{ + iproc_pll_clk_setup(node, &genpll, NULL, 0, genpll_clk, + ARRAY_SIZE(genpll_clk)); +} +CLK_OF_DECLARE(nsp_genpll_clk, "brcm,nsp-genpll", nsp_genpll_clk_init); + +static const struct iproc_pll_ctrl lcpll0 = { + .flags = IPROC_CLK_PLL_HAS_NDIV_FRAC | IPROC_CLK_EMBED_PWRCTRL, + .aon = AON_VAL(0x0, 1, 24, 0), + .reset = RESET_VAL(0x0, 23, 22, 16, 3, 12, 4, 19, 4), + .ndiv_int = REG_VAL(0x4, 20, 8), + .ndiv_frac = REG_VAL(0x4, 0, 20), + .pdiv = REG_VAL(0x4, 28, 3), + .status = REG_VAL(0x10, 12, 1), +}; + +static const struct iproc_clk_ctrl lcpll0_clk[] = { + [BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK] = { + .channel = BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 6, 3, 9), + .mdiv = REG_VAL(0x8, 24, 8), + }, + [BCM_NSP_LCPLL0_SDIO_CLK] = { + .channel = BCM_NSP_LCPLL0_SDIO_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 7, 4, 10), + .mdiv = REG_VAL(0x8, 16, 8), + }, + [BCM_NSP_LCPLL0_DDR_PHY_CLK] = { + .channel = BCM_NSP_LCPLL0_DDR_PHY_CLK, + .flags = IPROC_CLK_AON, + .enable = ENABLE_VAL(0x0, 8, 5, 11), + .mdiv = REG_VAL(0x8, 8, 8), + }, +}; + +static void __init nsp_lcpll0_clk_init(struct device_node *node) +{ + iproc_pll_clk_setup(node, &lcpll0, NULL, 0, lcpll0_clk, + ARRAY_SIZE(lcpll0_clk)); +} +CLK_OF_DECLARE(nsp_lcpll0_clk, "brcm,nsp-lcpll0", nsp_lcpll0_clk_init);
diff --git a/include/dt-bindings/clock/bcm-nsp.h b/include/dt-bindings/clock/bcm-nsp.h
new file mode 100644
index 0000000..ad5827c
--- /dev/null
+++ b/include/dt-bindings/clock/bcm-nsp.h@@ -0,0 +1,51 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _CLOCK_BCM_NSP_H +#define _CLOCK_BCM_NSP_H + +/* GENPLL clock channel ID */ +#define BCM_NSP_GENPLL 0 +#define BCM_NSP_GENPLL_PHY_CLK 1 +#define BCM_NSP_GENPLL_ENET_SW_CLK 2 +#define BCM_NSP_GENPLL_USB_PHY_REF_CLK 3 +#define BCM_NSP_GENPLL_IPROCFAST_CLK 4 +#define BCM_NSP_GENPLL_SATA1_CLK 5 +#define BCM_NSP_GENPLL_SATA2_CLK 6 + +/* LCPLL0 clock channel ID */ +#define BCM_NSP_LCPLL0 0 +#define BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK 1 +#define BCM_NSP_LCPLL0_SDIO_CLK 2 +#define BCM_NSP_LCPLL0_DDR_PHY_CLK 3 + +#endif /* _CLOCK_BCM_NSP_H */
--
1.9.1