[PATCH v2 1/4] ARM: dts: dra7: Add dt node for the sycon pcie

Hi Tony,

On Tuesday 13 October 2015 02:51 AM, Tony Lindgren wrote:

* Kishon Vijay Abraham I [off-list ref] [150915 06:37]:

quoted

Add new device tree node for the control module register space where
PCIe registers are present.

Signed-off-by: Kishon Vijay Abraham I <redacted>
---
 arch/arm/boot/dts/dra7.dtsi |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 5d65db9..0769b5d 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi

@@ -154,6 +154,11 @@
 					compatible = "syscon";
 					reg = <0x1c04 0x0020>;
 				};
+
+				scm_conf_pcie: tisyscon at 1c24 {
+					compatible = "syscon";
+					reg = <0x1c24 0x0024>;
+				};
 			};
 
 			cm_core_aon: cm_core_aon at 5000 {

Why don't you just extend the existing scm_conf1 area? This is not all pcie
specific for scm_conf_pcie, at least for PLLEN_CONTROL, RMII_CLK_SETTING
and MUXSEL_32K_CLKIN.

scm_conf_pcie has only PCIe registers (it starts at 0x4A003C24).
PLLEN_CONTROL and others are at 0x4A003C14 as per
DRA75x_DRA74x_SR1.1_NDA_TRM_vW.

Since PCIe itself has a bunch of registers for itself, thought of
creating a separate dt node. But I can extend scm_conf1 area.

Thanks
Kishon