[PATCH 4/4] arm64: dts: apq8016-sbc: enable spi buses on LS and HS
From: Stephen Boyd <hidden>
Date: 2015-10-08 18:16:40
Also in:
linux-arm-msm, linux-devicetree, lkml
On 10/08/2015 04:19 AM, Srinivas Kandagatla wrote:
quoted hunk ↗ jump to hunk
This patch enables spi buses on low speed and high speed expansion connectors on DB410C Signed-off-by: Srinivas Kandagatla <redacted> --- arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 3581272..d872654 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi@@ -92,11 +92,21 @@ status = "okay"; }; +&blsp_spi3 { + /* On High speed expansion */ + status = "okay"; +}; + &blsp_i2c4 { /* On High speed expansion */ status = "okay"; }; +&blsp_spi5 { + /* On Low speed expansion */ + status = "okay"; +}; + &blsp_i2c6 { /* On Low speed expansion */ status = "okay";
We've been using absolute nodes to mark device nodes as status = "okay". Can we keep doing that here please? -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project