[PATCH v3 04/26] ARM: pxa: magician: Optimize debug messages for LCD power
From: Petr Cvek <hidden>
Date: 2015-09-17 04:55:37
Also in:
linux-leds, linux-pm
Subsystem:
arm port, pxa2xx/pxa3xx support, the rest · Maintainers:
Russell King, Daniel Mack, Haojian Zhuang, Robert Jarzmik, Linus Torvalds
Optimize the debug messages for the LCD power. Signed-off-by: Petr Cvek <redacted> --- arch/arm/mach-pxa/magician.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 29d8146..1bac785 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c@@ -270,10 +270,9 @@ static struct pxafb_mode_info samsung_modes[] = { static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si) { - pr_debug("Toppoly LCD power\n"); + pr_debug("Toppoly LCD power: %s\n", on ? "on" : "off"); if (on) { - pr_debug("on\n"); gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1); gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1); udelay(2000);
@@ -285,7 +284,6 @@ static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si) udelay(2000); gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1); } else { - pr_debug("off\n"); msleep(15); gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0); udelay(500);
@@ -298,10 +296,9 @@ static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si) static void samsung_lcd_power(int on, struct fb_var_screeninfo *si) { - pr_debug("Samsung LCD power\n"); + pr_debug("Samsung LCD power: %s\n", on ? "on" : "off"); if (on) { - pr_debug("on\n"); if (system_rev < 3) gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1); else
@@ -314,7 +311,6 @@ static void samsung_lcd_power(int on, struct fb_var_screeninfo *si) gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1); mdelay(10); } else { - pr_debug("off\n"); mdelay(10); gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0); mdelay(30);
--
1.7.12.1