[PATCH 1/5] media: atmel-isi: correct yuv swap according to different sensor outputs
From: Josh Wu <hidden>
Date: 2015-09-22 05:09:08
Also in:
linux-media
Subsystem:
media input infrastructure (v4l/dvb), the rest · Maintainers:
Mauro Carvalho Chehab, Linus Torvalds
we need to configure the YCC_SWAP bits in ISI_CFG2 according to current
sensor output and Atmel ISI output format.
Current there are two cases Atmel ISI supported:
1. Atmel ISI outputs YUYV format.
This case we need to setup YCC_SWAP according to sensor output
format.
2. Atmel ISI output a pass-through formats, which means no swap.
Just setup YCC_SWAP as default with no swap.
Signed-off-by: Josh Wu <redacted>
---
drivers/media/platform/soc_camera/atmel-isi.c | 43 ++++++++++++++++++++-------
1 file changed, 33 insertions(+), 10 deletions(-)
diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c
index 45e304a..df64294 100644
--- a/drivers/media/platform/soc_camera/atmel-isi.c
+++ b/drivers/media/platform/soc_camera/atmel-isi.c@@ -103,13 +103,41 @@ static u32 isi_readl(struct atmel_isi *isi, u32 reg) return readl(isi->regs + reg); } +static u32 setup_cfg2_yuv_swap(struct atmel_isi *isi, + const struct soc_camera_format_xlate *xlate) +{ + /* By default, no swap for the codec path of Atmel ISI. So codec + * output is same as sensor's output. + * For instance, if sensor's output is YUYV, then codec outputs YUYV. + * And if sensor's output is UYVY, then codec outputs UYVY. + */ + u32 cfg2_yuv_swap = ISI_CFG2_YCC_SWAP_DEFAULT; + + if (xlate->host_fmt->fourcc == V4L2_PIX_FMT_YUYV) { + /* all convert to YUYV */ + switch (xlate->code) { + case MEDIA_BUS_FMT_VYUY8_2X8: + cfg2_yuv_swap = ISI_CFG2_YCC_SWAP_MODE_3; + break; + case MEDIA_BUS_FMT_UYVY8_2X8: + cfg2_yuv_swap = ISI_CFG2_YCC_SWAP_MODE_2; + break; + case MEDIA_BUS_FMT_YVYU8_2X8: + cfg2_yuv_swap = ISI_CFG2_YCC_SWAP_MODE_1; + break; + } + } + + return cfg2_yuv_swap; +} + static void configure_geometry(struct atmel_isi *isi, u32 width, - u32 height, u32 code) + u32 height, const struct soc_camera_format_xlate *xlate) { u32 cfg2; /* According to sensor's output format to set cfg2 */ - switch (code) { + switch (xlate->code) { default: /* Grey */ case MEDIA_BUS_FMT_Y8_1X8:
@@ -117,16 +145,11 @@ static void configure_geometry(struct atmel_isi *isi, u32 width, break; /* YUV */ case MEDIA_BUS_FMT_VYUY8_2X8: - cfg2 = ISI_CFG2_YCC_SWAP_MODE_3 | ISI_CFG2_COL_SPACE_YCbCr; - break; case MEDIA_BUS_FMT_UYVY8_2X8: - cfg2 = ISI_CFG2_YCC_SWAP_MODE_2 | ISI_CFG2_COL_SPACE_YCbCr; - break; case MEDIA_BUS_FMT_YVYU8_2X8: - cfg2 = ISI_CFG2_YCC_SWAP_MODE_1 | ISI_CFG2_COL_SPACE_YCbCr; - break; case MEDIA_BUS_FMT_YUYV8_2X8: - cfg2 = ISI_CFG2_YCC_SWAP_DEFAULT | ISI_CFG2_COL_SPACE_YCbCr; + cfg2 = ISI_CFG2_COL_SPACE_YCbCr | + setup_cfg2_yuv_swap(isi, xlate); break; /* RGB, TODO */ }
@@ -407,7 +430,7 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count) isi_writel(isi, ISI_INTDIS, (u32)~0UL); configure_geometry(isi, icd->user_width, icd->user_height, - icd->current_fmt->code); + icd->current_fmt); spin_lock_irq(&isi->lock); /* Clear any pending interrupt */
--
1.9.1