[PATCH 2/3] ARM: dts: sun5i: Add sun5i-q8-common.dtsi

On Thu, Sep 10, 2015 at 05:05:39PM +0200, Hans de Goede wrote:

Hi,

On 09-09-15 16:01, Maxime Ripard wrote:

quoted

On Tue, Sep 08, 2015 at 11:26:51PM +0200, Hans de Goede wrote:

quoted

Hi,

On 09/08/2015 04:33 PM, Maxime Ripard wrote:

quoted

On Sat, Sep 05, 2015 at 04:55:52PM +0200, Hans de Goede wrote:

quoted

This is the sun5i / a13 version of sun8i-q8-common.dtsi for use in dts
files for a13 q8 based tablets. Compared to sun8i this uses uart1 for the
serial console, and PG0 for card-detect for mmc0.

This also adds pmic and otg support, which both use the same config on
all known q8 a13 devices. This is not present in sun5i-q8-common.dtsi
because pmic / otg support for sun8i has not yet been merged.

Signed-off-by: Hans de Goede <redacted>

Are we going to have any user but the one you posted in the patch 3
planned?

Depends on what I can get my hands on / what is in the post atm.

One difference in fex files of different 18 variants is how the usb wifi is
powered, either via a gpio or via ldo3. Also there are differences in which
accelerometer is used, so eventually I expect there to be several users
of this dtsi.

But no difference in the SoC used (A13 vs A10s)?

I'm not sure having 18 DTs for a single board name is going to be
really helpful.

Sorry I meant to write q8 not 18 :)

quoted

It would be something to be supported by some quirks
mechanism, instead of having to require the user to pick the right one.

Agreed, which is why I added a generic sun5i-a13-q8-tablet.dts, which
can then later be extended with quirks and such to get all the different
variants supported. Which I guess means that the contents of
sun5i-q8-common.dtsi can be folded into sun5i-a13-q8-tablet.dts, otoh
we may have some special cases which do require a separate dts and
having sun5i-q8-common.dtsi follows the same scheme as used for the
a23 / a33 tablets. In the future we should probably also add
sun8i-a23-q8-tablet.dts and sun8i-a33-q8-tablet.dts files and make
the existing ones just empty files with a single #include for
compatibility.

If possible I would like to at least have you queue up the default
sun5i-a13-q8-tablet.dts so that we've a dts file for a13 based tablets
which at least gets the basics going.

Either in its current form, or with it and sun5i-q8-common.dtsi
squashed together. If you want a squashed version let me know and
I'll do a resend.

Are you coming to ELCE ? I think the both of us should go to:

http://lceeu2015.sched.org/event/999c45c7fe78824a88269f35539c7e5c#.VfGcCLPYqlM

(Device Tree NG BoF) and try to hash out a solution for this there,
the quirks / variants stuff sounds good, but I wonder how far along
that is ?

I will be to the technical showcase, but we can always discuss with
Pantelis a bit later :)

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150918/a4d774dd/attachment.sig>