[PATCH 2/2] ARM: efm32: switch to vendor,device compatible strings
From: Uwe Kleine-König <hidden>
Date: 2015-09-10 08:09:52
Also in:
linux-devicetree
Subsystem:
the rest · Maintainer:
Linus Torvalds
Possibly related (same subject, not in this thread)
- 2014-06-30 · [PATCH 2/2] ARM: efm32: switch to vendor,device compatible strings · Uwe Kleine-König <hidden>
The mainline drivers were fixed in commits - 4ea8dafd2475 (serial: efm32: use $vendor,$device scheme for compatible string) - 12f6dd860cf8 (spi: efm32: use $vendor,$device scheme for compatible string) - 63cc122381bd (clocksource: efm32: use $vendor,$device scheme for compatible string) which are all in 3.16-rc1 to also support these compatible strings. For the other affected peripherals (adc and gpio) there are no drivers in mainline yet. Signed-off-by: Uwe Kleine-K?nig <redacted> --- arch/arm/boot/dts/efm32gg.dtsi | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/efm32gg.dtsi b/arch/arm/boot/dts/efm32gg.dtsi
index 106d505c5d3d..c747983771c7 100644
--- a/arch/arm/boot/dts/efm32gg.dtsi
+++ b/arch/arm/boot/dts/efm32gg.dtsi@@ -23,7 +23,7 @@ soc { adc: adc at 40002000 { - compatible = "efm32,adc"; + compatible = "energymicro,efm32-adc"; reg = <0x40002000 0x400>; interrupts = <7>; clocks = <&cmu clk_HFPERCLKADC0>;
@@ -31,7 +31,7 @@ }; gpio: gpio at 40006000 { - compatible = "efm32,gpio"; + compatible = "energymicro,efm32-gpio"; reg = <0x40006000 0x1000>; interrupts = <1 11>; gpio-controller;
@@ -45,7 +45,7 @@ i2c0: i2c at 4000a000 { #address-cells = <1>; #size-cells = <0>; - compatible = "efm32,i2c"; + compatible = "energymicro,efm32-i2c"; reg = <0x4000a000 0x400>; interrupts = <9>; clocks = <&cmu clk_HFPERCLKI2C0>;
@@ -56,7 +56,7 @@ i2c1: i2c at 4000a400 { #address-cells = <1>; #size-cells = <0>; - compatible = "efm32,i2c"; + compatible = "energymicro,efm32-i2c"; reg = <0x4000a400 0x400>; interrupts = <10>; clocks = <&cmu clk_HFPERCLKI2C1>;
@@ -67,7 +67,7 @@ spi0: spi at 4000c000 { /* USART0 */ #address-cells = <1>; #size-cells = <0>; - compatible = "efm32,spi"; + compatible = "energymicro,efm32-spi"; reg = <0x4000c000 0x400>; interrupts = <3 4>; clocks = <&cmu clk_HFPERCLKUSART0>;
@@ -77,7 +77,7 @@ spi1: spi at 4000c400 { /* USART1 */ #address-cells = <1>; #size-cells = <0>; - compatible = "efm32,spi"; + compatible = "energymicro,efm32-spi"; reg = <0x4000c400 0x400>; interrupts = <15 16>; clocks = <&cmu clk_HFPERCLKUSART1>;
@@ -87,7 +87,7 @@ spi2: spi at 4000c800 { /* USART2 */ #address-cells = <1>; #size-cells = <0>; - compatible = "efm32,spi"; + compatible = "energymicro,efm32-spi"; reg = <0x4000c800 0x400>; interrupts = <18 19>; clocks = <&cmu clk_HFPERCLKUSART2>;
@@ -95,7 +95,7 @@ }; uart0: uart at 4000c000 { /* USART0 */ - compatible = "efm32,uart"; + compatible = "energymicro,efm32-uart"; reg = <0x4000c000 0x400>; interrupts = <3 4>; clocks = <&cmu clk_HFPERCLKUSART0>;
@@ -103,7 +103,7 @@ }; uart1: uart at 4000c400 { /* USART1 */ - compatible = "efm32,uart"; + compatible = "energymicro,efm32-uart"; reg = <0x4000c400 0x400>; interrupts = <15 16>; clocks = <&cmu clk_HFPERCLKUSART1>;
@@ -111,7 +111,7 @@ }; uart2: uart at 4000c800 { /* USART2 */ - compatible = "efm32,uart"; + compatible = "energymicro,efm32-uart"; reg = <0x4000c800 0x400>; interrupts = <18 19>; clocks = <&cmu clk_HFPERCLKUSART2>;
@@ -119,7 +119,7 @@ }; uart3: uart at 4000e000 { /* UART0 */ - compatible = "efm32,uart"; + compatible = "energymicro,efm32-uart"; reg = <0x4000e000 0x400>; interrupts = <20 21>; clocks = <&cmu clk_HFPERCLKUART0>;
@@ -127,7 +127,7 @@ }; uart4: uart at 4000e400 { /* UART1 */ - compatible = "efm32,uart"; + compatible = "energymicro,efm32-uart"; reg = <0x4000e400 0x400>; interrupts = <22 23>; clocks = <&cmu clk_HFPERCLKUART1>;
@@ -135,28 +135,28 @@ }; timer0: timer at 40010000 { - compatible = "efm32,timer"; + compatible = "energymicro,efm32-timer"; reg = <0x40010000 0x400>; interrupts = <2>; clocks = <&cmu clk_HFPERCLKTIMER0>; }; timer1: timer at 40010400 { - compatible = "efm32,timer"; + compatible = "energymicro,efm32-timer"; reg = <0x40010400 0x400>; interrupts = <12>; clocks = <&cmu clk_HFPERCLKTIMER1>; }; timer2: timer at 40010800 { - compatible = "efm32,timer"; + compatible = "energymicro,efm32-timer"; reg = <0x40010800 0x400>; interrupts = <13>; clocks = <&cmu clk_HFPERCLKTIMER2>; }; timer3: timer at 40010c00 { - compatible = "efm32,timer"; + compatible = "energymicro,efm32-timer"; reg = <0x40010c00 0x400>; interrupts = <14>; clocks = <&cmu clk_HFPERCLKTIMER3>;
--
2.5.0