[PATCH v2 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support
From: p.zabel@pengutronix.de (Philipp Zabel)
Date: 2015-09-08 14:49:20
Also in:
linux-devicetree
Am Dienstag, den 08.09.2015, 16:34 +0200 schrieb Gary Bisson:
quoted hunk
This patch adds the different touchscreens that can be connected using the displays available for this board. http://boundarydevices.com/product-category/displays/ Signed-off-by: Gary Bisson <redacted> --- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index ad16dce..24b667d 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi@@ -284,6 +284,22 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; + + egalax_ts at 04 {
I'd prefer to use generic names for the nodes, such as "touchscreen at 04", and "touchscreen at 38" below.
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ ft5x06_ts at 38 {
+ compatible = "edt,edt-ft5x06";
+ reg = <0x38>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;This should be wake-gpios and GPIO_ACTIVE_HIGH according to the other users.
+ };
};
&iomuxc {With those changes, Acked-by: Philipp Zabel <p.zabel@pengutronix.de> regards Philipp