[PATCH v2 2/2] regulator: act8865: add DT binding for property "active-semi, vsel-high"
From: Wenyou Yang <hidden>
Date: 2015-09-30 07:31:37
Also in:
linux-devicetree, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, voltage and current regulator framework · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Liam Girdwood, Mark Brown
Add a DT property "active-semi,vsel-high" to indicate the VSEL pin is high. If this property is missing, then assume the VSEL pin is low(0). Signed-off-by: Wenyou Yang <redacted> --- Changes in v2: None .../bindings/regulator/act8865-regulator.txt | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
index e91485d..6067d98 100644
--- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt@@ -8,6 +8,8 @@ Required properties: Optional properties: - system-power-controller: Telling whether or not this pmic is controlling the system power. See Documentation/devicetree/bindings/power/power-controller.txt . +- active-semi,vsel-high: Indicates the VSEL pin is high. + If this property is missing, assume the VSEL pin is low(0). Optional input supply properties: - for act8600:
@@ -49,6 +51,7 @@ Example: pmic: act8865 at 5b { compatible = "active-semi,act8865"; reg = <0x5b>; + active-semi,vsel-high; status = "disabled"; regulators {
--
1.7.9.5