[PATCH v4 5/5] arm64: dts: Add sensor node to Juno dt

Liviu Dudau [off-list ref] writes:

On Tue, Sep 15, 2015 at 05:51:01PM +0100, Punit Agrawal wrote:

quoted

The SCP firmware on Juno provides access to SoC sensors via the
SCPI. Add the sensor nodes to the device tree to enable this support.

Signed-off-by: Punit Agrawal <redacted>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>

Acked-by: Liviu Dudau <liviu.dudau@arm.com>

Thanks Liviu!

quoted

Cc: Sudeep Holla <redacted>
---
 arch/arm64/boot/dts/arm/juno-base.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index c624208..dd5158e 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi

@@ -96,6 +96,11 @@
 				clock-output-names = "pxlclk0", "pxlclk1";
 			};
 		};
+
+		scpi_sensors0: sensors {
+			compatible = "arm,scpi-sensors";
+			#thermal-sensor-cells = <1>;
+		};
 	};
 
 	/include/ "juno-clocks.dtsi"

-- 
2.5.1