On 2015-08-27 17:34, Stefan Agner wrote:

+static inline int vf610_nfc_correct_data(struct mtd_info *mtd, uint8_t *dat,
+					 uint8_t *oob, int page)
+{
+	struct vf610_nfc *nfc = mtd_to_nfc(mtd);
+	u32 ecc_status_off = NFC_MAIN_AREA(0) + ECC_SRAM_ADDR + ECC_STATUS;
+	u8 ecc_status;
+	u8 ecc_count;
+	int flips;
+	int flips_threshold = nfc->chip.ecc.strength / 2;
+
+	ecc_status = vf610_nfc_read(nfc, ecc_status_off) & 0xff;
+	ecc_count = ecc_status & ECC_STATUS_ERR_COUNT;
+
+	if (!(ecc_status & ECC_STATUS_MASK))
+		return ecc_count;
+
+	/* Read OOB without ECC unit enabled */
+	vf610_nfc_command(mtd, NAND_CMD_READOOB, 0, page);
+	vf610_nfc_read_buf(mtd, oob, mtd->oobsize);
+
+	/*
+	 * On an erased page, bit count (including OOB) should be zero or
+	 * at least less then half of the ECC strength.
+	 */
+	flips = count_written_bits(dat, nfc->chip.ecc.size, flips_threshold);
+	flips += count_written_bits(oob, mtd->oobsize, flips_threshold);
+
+	if (unlikely(flips > flips_threshold))
+		return -EINVAL;
+
+	/* Erased page. */
+	memset(dat, 0xff, nfc->chip.ecc.size);
+	memset(oob, 0xff, mtd->oobsize);
+	return 0;

I guess I should return the amount of bitflips here. Will send out a v12
today.

--
Stefan