Thread (5 messages) flat view 5 messages, 3 authors, 2015-08-25
STALE4031d

[PATCH] net: sun4i-emac: Claim emac sram

From: Hans de Goede <hidden>
Date: 2015-08-23 18:31:38
Also in: netdev
Subsystem: networking drivers, the rest · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

Claim the emac sram ourselves, rather then relying on the bootloader
having mapped the sram to the emac controller during boot.

Signed-off-by: Hans de Goede <redacted>
---
 drivers/net/ethernet/allwinner/sun4i-emac.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c
index bab01c84..48ce83e 100644
--- a/drivers/net/ethernet/allwinner/sun4i-emac.c
+++ b/drivers/net/ethernet/allwinner/sun4i-emac.c
@@ -28,6 +28,7 @@
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/phy.h>
+#include <linux/soc/sunxi/sunxi_sram.h>
 
 #include "sun4i-emac.h"
 
@@ -857,11 +858,17 @@ static int emac_probe(struct platform_device *pdev)
 
 	clk_prepare_enable(db->clk);
 
+	ret = sunxi_sram_claim(&pdev->dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Error couldn't map SRAM to device\n");
+		goto out;
+	}
+
 	db->phy_node = of_parse_phandle(np, "phy", 0);
 	if (!db->phy_node) {
 		dev_err(&pdev->dev, "no associated PHY\n");
 		ret = -ENODEV;
-		goto out;
+		goto out_release_sram;
 	}
 
 	/* Read MAC-address from DT */
@@ -893,7 +900,7 @@ static int emac_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "Registering netdev failed!\n");
 		ret = -ENODEV;
-		goto out;
+		goto out_release_sram;
 	}
 
 	dev_info(&pdev->dev, "%s: at %p, IRQ %d MAC: %pM\n",
@@ -901,6 +908,8 @@ static int emac_probe(struct platform_device *pdev)
 
 	return 0;
 
+out_release_sram:
+	sunxi_sram_release(&pdev->dev);
 out:
 	dev_err(db->dev, "not found (%d).\n", ret);
 
-- 
2.4.3
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help