On 20/08/15 23:07, Petr Cvek wrote:

Dne 20.8.2015 v 12:55 Tomi Valkeinen napsal(a):

quoted

On 08/08/15 21:20, Petr Cvek wrote:

quoted

diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 2d98de5..8f485ec 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig

@@ -1893,6 +1893,11 @@ config FB_PXA_OVERLAY
 	bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
 	default n
 	depends on FB_PXA && (PXA27x || PXA3xx)
+	---help---
+	  Using the overlay 2 and YUV420 mode on a PXA27x C0 chip revision will
+	  hang the LCD until the next SoC restart (errata E24).

Shouldn't the driver handle this? It should not allow the combination to
be used.

 Tomi

Probably, but I don't know which revisions are OK and which are not. Errata document:

	Marvell? PXA270M Processor Specification Update
	MV-S900957-00

has only 3 revisions, but PXA Manual lists 6 (2.2.5.1 Processor ID Register) and one revision from errata is not shown in my PXA Manual. I can exclude mine revision (from "system_rev" variable), but there should be some warning somewhere in configuration.

No, configuration or kernel docs is not the right place for this. The
user is not going to see that. And a single kernel image is supposed to
run on different soc/board versions, so you can't do selections like
this in the kernel config.

The driver should detect the bad revision, and then apply the
workaround, or if that's not possible, refuse the use of the
configuration that leads to the HW bug. Or if even that's not possible,
the driver should print a warning when starting, so that the user is
able to see it.

 Tomi

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150821/16323465/attachment.sig>