[PATCH v5 05/11] drivers: PL011: refactor pl011_probe()
From: Timur Tabi <hidden>
Date: 2015-08-09 00:59:00
Also in:
linux-serial
On Thu, May 21, 2015 at 9:26 AM, Andre Przywara [off-list ref] wrote:
+static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
+{
+ struct uart_amba_port *uap;
+ struct vendor_data *vendor = id->data;
+ int portnr, ret;
+
+ portnr = pl011_find_free_port();
+ if (portnr < 0)
+ return portnr;
+
+ uap = devm_kzalloc(&dev->dev, sizeof(struct uart_amba_port),
+ GFP_KERNEL);
+ if (!uap)
+ return -ENOMEM;
+
+ uap->clk = devm_clk_get(&dev->dev, NULL);
+ if (IS_ERR(uap->clk))
+ return PTR_ERR(uap->clk);
+
+ = vendor;I'm having trouble with this. Specifically, I can't get SBSA early console to work, because uap->vendor is uninitialized when pl011_early_write() is called. I don't have a non-SBSA system to test, but looking at the code, I'm not sure how early console is supposed to work any more. In both SBSA and non-SBSA cases, uap->vendor is not initialized until the probe function is called. Isn't that too late? I thought early console was supposed to be running before the driver is probed. If I make this change, then early console works on SBSA systems (with earlycon=pl011,<address>). But of course, this only works for SBSA and breaks regular PL011.
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c@@ -2326,9 +2326,15 @@ static void pl011_early_write(struct console *con, const static int __init pl011_early_console_setup(struct earlycon_device *device, const char *opt) { + struct uart_amba_port *uap = + container_of(&device->port, struct uart_amba_port, port); + if (!device->port.membase) return -ENODEV; + if (!uap->vendor) + uap->vendor = &vendor_sbsa; + device->con->write = pl011_early_write; return 0; }
--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.