On Wed, Aug 12, 2015 at 1:50 AM, Michael Turquette
[off-list ref] wrote:

Quoting Chen-Yu Tsai (2015-08-10 21:49:54)

quoted

On Sat, Aug 8, 2015 at 12:21 AM, Chen-Yu Tsai [off-list ref] wrote:

quoted

On Sat, Aug 1, 2015 at 1:46 AM, Maxime Ripard
[off-list ref] wrote:

quoted

The A23 and A33 gates have a non continuous set of clock IDs that are
valid. Add the clock-indices property to the DT to express this.

Signed-off-by: Maxime Ripard <redacted>
---
 arch/arm/boot/dts/sun8i-a23-a33.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 7abd0ae3143d..c318c770b6c1 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi

@@ -180,6 +180,15 @@
                        compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
                        reg = <0x01c20060 0x8>;
                        clocks = <&ahb1>;
+                       clock-indices = <1>, <6>,

Turns out the A33 (and I assume the same with the A23) has
an ahb1 clock gate for the Security System at clock-index <5>.

Looks like the A23 does not have this one, nor the SS mod clock.

quoted

This is found in the updated A33 user manual.

quoted

+                                       <8>, <9>, <10>,
+                                       <13>, <14>,
+                                       <19>, <20>,
+                                       <21>, <24>, <26>,
+                                       <29>, <32>, <36>,
+                                       <40>, <44>, <46>,
+                                       <52>, <54>,

<53> is ahb1 clock gate for msgbox, again found in A33 manual.

A23 has this one. Found in Allwinner kernel sources.

quoted

quoted

+                                       <57>;

<58> is ahb1 clock gate for SAT, which seems to be part of the
display pipeline.

This one is A33 only.

I guess we should do a separate compatible for A33 AHB1 clock gates.

ChenYu,

I believe Maxime is on vacation. I told him that I would pick these
patches directly. It looks like your comments can be fixed up in
follow-up patches at a later date, correct?

That's right. I was mostly asking how to proceed with adding them.

If so then I will apply them to clk-next.

Please do. (I see they are already in.)

Thanks
ChenYu

Regards,
Mike

quoted

ChenYu

quoted

quoted

                        clock-output-names = "ahb1_mipidsi", "ahb1_dma",
                                        "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
                                        "ahb1_nand", "ahb1_sdram",

@@ -196,6 +205,8 @@
                        compatible = "allwinner,sun8i-a23-apb1-gates-clk";
                        reg = <0x01c20068 0x4>;
                        clocks = <&apb1>;
+                       clock-indices = <0>, <5>,
+                                       <12>, <13>;
                        clock-output-names = "apb1_codec", "apb1_pio",
                                        "apb1_daudio0", "apb1_daudio1";
                };

@@ -213,6 +224,10 @@
                        compatible = "allwinner,sun8i-a23-apb2-gates-clk";
                        reg = <0x01c2006c 0x4>;
                        clocks = <&apb2>;
+                       clock-indices = <0>, <1>,
+                                       <2>, <16>,
+                                       <17>, <18>,
+                                       <19>, <20>;
                        clock-output-names = "apb2_i2c0", "apb2_i2c1",
                                        "apb2_i2c2", "apb2_uart0",
                                        "apb2_uart1", "apb2_uart2",
--

2.4.6

Not sure if you want to add the clocks I mentioned together
in this patch, or do a separate patch.

The rest look good.

ChenYu

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel