On 28/08/15 16:59, Ganapatrao Kulkarni wrote:

On Fri, Aug 28, 2015 at 8:01 PM, Matthias Brugger
[off-list ref] wrote:

quoted

On 14/08/15 18:39, Ganapatrao Kulkarni wrote:

quoted

v5:
         - created base verion of numa.c which creates dummy numa without
using dt
           on single socket platforms. Then added patches for dt support.
         - Incorporated review comments from Hanjun Guo.

v4:
done changes as per Arnd review comments.

v3:
Added changes to support numa on arm64 based platforms.
Tested these patches on cavium's multinode(2 node topology) platform.
In this patchset, defined and implemented dt bindings for numa mapping
for core and memory using device node property arm,associativity.

v2:
Defined and implemented numa map for memory, cores to node and
proximity distance matrix of nodes.

v1:
Initial patchset to support numa on arm64 platforms.

Note:
         1. This patchset is tested for numa with dt on
            thunderx single socket and dual socket boards.
         2. Numa DT booting needs the dt memory nodes, which are deleted in
current efi-stub,
         hence to try numa with dt, you need to rebase with ard's patchset.

http://git.linaro.org/people/ard.biesheuvel/linux-arm.git/shortlog/refs/heads/arm64-uefi-early-fdt-handling


Ganapatrao Kulkarni (4):
    arm64, numa: adding numa support for arm64 platforms.
    Documentation: arm64/arm: dt bindings for numa.
    arm64, numa: adding numa support for arm64 platforms.
    arm64, dt, thunderx: Add initial dts for Cavium Thunder SoC in 2 Node
      topology.

   Documentation/devicetree/bindings/arm/numa.txt  | 212 +++++++
   arch/arm64/Kconfig                              |  32 +
   arch/arm64/boot/dts/cavium/Makefile             |   2 +-
   arch/arm64/boot/dts/cavium/thunder-88xx-2n.dts  |  78 +++
   arch/arm64/boot/dts/cavium/thunder-88xx-2n.dtsi | 790
++++++++++++++++++++++++
   arch/arm64/include/asm/mmzone.h                 |  32 +
   arch/arm64/include/asm/numa.h                   |  49 ++
   arch/arm64/kernel/Makefile                      |   1 +
   arch/arm64/kernel/dt_numa.c                     | 316 ++++++++++
   arch/arm64/kernel/setup.c                       |   9 +
   arch/arm64/kernel/smp.c                         |   3 +
   arch/arm64/mm/Makefile                          |   1 +
   arch/arm64/mm/init.c                            |  34 +-
   arch/arm64/mm/numa.c                            | 563 +++++++++++++++++
   14 files changed, 2115 insertions(+), 7 deletions(-)
   create mode 100644 Documentation/devicetree/bindings/arm/numa.txt
   create mode 100644 arch/arm64/boot/dts/cavium/thunder-88xx-2n.dts
   create mode 100644 arch/arm64/boot/dts/cavium/thunder-88xx-2n.dtsi
   create mode 100644 arch/arm64/include/asm/mmzone.h
   create mode 100644 arch/arm64/include/asm/numa.h
   create mode 100644 arch/arm64/kernel/dt_numa.c
   create mode 100644 arch/arm64/mm/numa.c

On which version is this patch-set based?

4.2 -rc5

Seems as if
"arm64: add support for memtest" (36dd9086cb)
is not taken into account. I wasn't able to apply the set without 
conflicts, neither on v4.2-rc5, v4.2-rc8, nor on
arm64-uefi-early-fdt-handling.

Regards,
Matthias