[PATCH 12/17] ARM: dts: am57xx-beagle-x15: Fix regulator populated in MMC1 dt node

Hi Tony,

On Thursday 30 July 2015 01:07 AM, Nishanth Menon wrote:

On 07/29/2015 06:09 AM, Kishon Vijay Abraham I wrote:

quoted

For beagle x15, both the vdd and io lines are connected to the
same regulator (ldo1_reg). However vmmc_aux is populated to vdd_3v3.
Remove it.

Signed-off-by: Kishon Vijay Abraham I <redacted>
---
 arch/arm/boot/dts/am57xx-beagle-x15.dts |    1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index a63bf78..d0db5c5 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts

@@ -579,7 +579,6 @@
 	pinctrl-0 = <&mmc1_pins_default>;
 
 	vmmc-supply = <&ldo1_reg>;
-	vmmc_aux-supply = <&vdd_3v3>;
 	pbias-supply = <&pbias_mmc_reg>;
 	bus-width = <4>;
 	cd-gpios = <&gpio6 27 0>; /* gpio 219 */

Acked-by: Nishanth Menon <nm@ti.com>

Can you pick this one or you want me to resend it?

Thanks
Kishon